Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING › 2020.07–2020.09
RM36W0E _59 Vehicle Exterior _088302 EXTERIOR PANELS / TRIM _0421044 ROCKER PANEL MOULDING A

EXTERIOR PANELS / TRIM  ROCKER PANEL MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75852 1.INSTALL ROCKER PANEL MOULDING (for TMC Made)

a.

Engage the clips to install the rocker panel moulding as shown in the illustration.

B577641C01
0,0 0,0 false
V100155

Protective Tape
V113147

Install in this Direction



b.

Install the 4 grommets.


c.

Install the 6 screws


d.

Install the 6 clips.


e.

Remove the protective tape.


Hide 75852 2.INSTALL ROCKER PANEL MOULDING LH (for TMMF Made)

a.

Engage the clips to install the rocker panel moulding as shown in the illustration.

B577641C01
0,0 0,0 false
V100155

Protective Tape
V113147

Install in this Direction



b.

Install the 3 grommets.


c.

Install the 5 screws.


d.

w/ o Engine Under Cover Assembly:

i.

Install the 2 screws and clip.



e.

Install the 6 clips.


f.

Remove the protective tape.


Hide 65632D 3.INSTALL REAR WHEEL HOUSE FRONT PLATE (w/ Engine Under Cover Assembly)