Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROOF DRIP SIDE FINISH MOULDING › 2020.07–2020.09
RM36W0E _59 Vehicle Exterior _088302 EXTERIOR PANELS / TRIM _0421046 ROOF DRIP SIDE FINISH MOULDING A

EXTERIOR PANELS / TRIM  ROOF DRIP SIDE FINISH MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75552 1.REMOVE ROOF DRIP SIDE FINISH MOULDING (w/o Glass Roof)

a.
B567992C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the roof drip side finish moulding.


b.
B567993

Disengage the clips to remove the roof drip side finish moulding.

NOTICE:
·

Do not remove the No. 1 roof drip side finish moulding clips.

·

If a No. 1 roof drip side finish moulding clip is damaged or falls off, replace it with a new one.




Hide 75552 2.REMOVE ROOF DRIP SIDE FINISH MOULDING (w/ Glass Roof)

a.
B567994C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the roof drip side finish moulding.


b.
B567995

Disengage the clips to remove the roof drip side finish moulding.

NOTICE:
·

Do not remove the No. 1 roof drip side finish moulding clips.

·

If a No. 1 roof drip side finish moulding clip is damaged or falls off, replace it with a new one.