The millimeter wave radar sensor assembly communicates with each sensor and ECU via CAN communication.
If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
| U012687 | Lost Communication with Steering Angle Sensor Module Missing Message | When the dynamic radar cruise control system is operating, a communication error between the millimeter wave radar sensor assembly and steering sensor continues for 5 seconds or more. | CAN communication system | Radar Cruise2 |
| U012987 | Lost Communication with Brake System Control Module Missing Message | When the dynamic radar cruise control system is operating, a communication error between the millimeter wave radar sensor assembly and skid control ECU (brake booster with master cylinder assembly)*1 or skid control ECU (brake actuator assembly)*2 continues for 5 seconds or more. | CAN communication system | Radar Cruise2 |
| U015587 | Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message | When the dynamic radar cruise control system is operating, a communication error between the millimeter wave radar sensor assembly and combination meter assembly continues for 12 seconds or more. | CAN communication system | Radar Cruise2 |
| U029387 | Lost Communication with Hybrid/EV Powertrain Control Module Missing Message | When the dynamic radar cruise control system is operating, a communication malfunction between the hybrid vehicle control ECU and millimeter wave radar sensor assembly is detected for 6 seconds or more. | CAN communication system | Radar Cruise2 |
| U110687 | Lost Communication with Electric Parking Brake Module Missing Message | When the dynamic radar cruise control system is operating, a communication error between the millimeter wave radar and skid control ECU (brake actuator assembly) continues for 5 seconds or more. | CAN communication system | Radar Cruise2 |
*1: for TMC Made
*2: for TMMF Made
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Make sure that the DTC detection conditions are met.
If the detection conditions are not met, the system cannot detect the malfunction.
Check for DTCs.
| Result | Proceed to |
|---|---|
| DTC U012687, U012987, U015587, U029387 or U110687 is output | A |
| DTCs are not output | B |
| None of the above conditions are met | C |
A
B
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
C