Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model TMMF Made) › 2020.07–2021.11
RM36W0E _54 Brake _088016 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0432441 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model TMMF Made) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model TMMF Made)  C05261F  Steering Angle Sensor Module Circuit Intermittent  


DESCRIPTION

The skid control ECU (brake actuator assembly) receives signals from the steering sensor via CAN communication.

When a rapid fluctuation in the steering angle sensor signal has been detected, the skid control ECU (brake actuator assembly) stores the following DTC.

HINT:
·

When a malfunction occurs in the communication line to the steering sensor, U012687 is output.

·

If a DTC related to the CAN communication line is output, first troubleshoot the CAN communication line.



DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
C05261F Steering Angle Sensor Module Circuit Intermittent For the most recent 6 steering angle sensor signals, the difference between the average of the most recent 3 signals and the average of the remaining 3 signals exceeds the threshold. Steering sensor Brake

PROCEDURE

1.REPLACE STEERING SENSOR

NEXT

END