LOAD OPERATION OUTPUT
Load is turned on or off according to the operation signals and switch signals from each ECU.
| Components | Semiconductor Power Integration ECU | No. 2 Semiconductor Power Integration ECU | Power Distribution Box Assembly (Instrument Panel Junction Block Assembly) | Operation Signal Communication Support | |
|---|---|---|---|---|---|
|
*1: for LED Headlight *2: for Halogen Headlight *3: w/ Fog Light *4: w/ PTC heater *5: w/ Mirror Heater System *6: w/ Front Seat Heater *7: w/ Automatic Air Conditioning System *8: w/ Manual Air Conditioning System *9: Built into power distribution box assembly (power distribution box assembly). |
|||||
| Headlight ECU Assembly*1 | ○ | - | - | Not supported | |
| Headlight Assembly Low Bulb*2 | ○ | - | - | Not supported | |
| Headlight Assembly High Solenoid*2 | ○ | - | - | Supported | |
| Headlight Assembly Daytime Running Light | ○ | - | - | Supported | |
| Fog Light Assembly*3 | ○ | - | - | Supported | |
| PTC Heater (Quick Heater Assembly)*4 | - | ○ | - | Supported | |
| Rear Window Defogger / Mirror Heater*5 | - | - | ○ | ·
Supported*7 ·
Not supported*8 |
|
| Taillight | - | - | ○ | Supported | |
| Rear Fog Light | - | - | ○ | Supported | |
| Back-up Light | - | - | ○ | Not supported | |
| Outer Rear View Mirror Assembly | - | - | ○ | Supported | |
| Panel Illumination | - | - | ○ | Supported | |
| Blower Motor with Fan Sub-assembly*8 | - | - | ○ | Not supported | |
| Seat Heater LH*6 | High/Low | - | - | ○ | Not supported |
| Seat Heater RH*6 | High/Low | - | - | ○ | Not supported |
| Passenger Seat Buckle Switch Delegated Input | - | - | ○ | - | |
| Occupant Detection Sensor Delegated Input | - | - | ○ | - | |
| Rear Seat RH Buckle Switch Delegated Input | - | - | ○ | - | |
| Rear Seat CTR Buckle Switch Delegated Input | - | - | ○ | - | |
| Rear Seat LH Buckle Switch Delegated Input | - | - | ○ | - | |
| IGR Relay*9 | - | - | ○ | Not supported | |
SEMICONDUCTOR FUSE FUNCTION
When a malfunction current occurs during load operation, the current is shut off before the electrical lines emit smoke, and then load is turned off. After the current is shut off, the off condition is maintained until the operation signals or switch signals turn off.