Home › Vehicle Exterior › ACOUSTIC VEHICLE ALERTING SYSTEM › VEHICLE APPROACHING SPEAKER › from 2020.07
RM36W0E _59 Vehicle Exterior _091206 ACOUSTIC VEHICLE ALERTING SYSTEM _0434279 VEHICLE APPROACHING SPEAKER G

ACOUSTIC VEHICLE ALERTING SYSTEM  VEHICLE APPROACHING SPEAKER  INSPECTION  


PROCEDURE

Hide 86570 1.INSPECT VEHICLE APPROACHING SPEAKER ASSEMBLY

a.

Check the resistance.

i.
E220216C53
1.542,0.417 1.875,0.583 0.333,0.167 1.333,1.656 1.563,1.281 true 2.063,1.677 1.896,1.281 true 0.229,0.156 0.417,0.344 0.188,0.188 10 false *a 1.594,0.427 2.052,0.625 0.458,0.198 10 false A61 1.156,1.688 1.615,1.885 0.458,0.198 10 false SP+ 1.99,1.708 2.448,1.906 0.458,0.198 10 false SP-
*a Component without harness connected
(Vehicle Approaching Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance
Tester Connection Condition Specified Condition
A61-2(SP+) - A61-1(SP-) Always 3.2 to 4.8 Ω

HINT:
·

Make sure that there are no problems such as looseness or play with the installation of the vehicle approaching speaker assembly.

·

Make sure that there are no abnormalities with the vehicle approaching speaker assembly such as the presence of foreign material or tears in the paper of the speaker cone.



If the result is not as specified, replace the vehicle approaching speaker assembly.