Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model) › 2020.07–2021.11
RM36W0E _51 Engine / Hybrid System _088664 CRUISE CONTROL _0424997 DYNAMIC RADAR CRUISE CONTROL SYSTEM(for HV Model) C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM(for HV Model)  P057113  Brake Switch "A" Circuit Open  


DESCRIPTION

When the brakes are applied by the dynamic radar cruise control system, the skid control ECU (brake booster with master cylinder assembly)*1 or skid control ECU (brake actuator assembly)*2 operates the stop light switch assembly (stop light control relay) to illuminate the stop lights.

If the hybrid vehicle control ECU receives a signal from the skid control ECU (brake booster with master cylinder assembly)*1 or skid control ECU (brake actuator assembly)*2 indicating a malfunction of the stop light control relay, DTC P057113 is stored.

*1: for TMC Made

*2: for TMMF Made


DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
P057113 Brake Switch "A" Circuit Open When the dynamic radar cruise control system is operating, the hybrid vehicle control ECU detects a signal indicating a stop light control relay malfunction from the skid control ECU (brake booster with master cylinder assembly)*1 or skid control ECU (brake actuator assembly)*2 for approximately 0.2 seconds or more. Electronically controlled brake system Radar Cruise1

*1: for TMC Made

*2: for TMMF Made


PROCEDURE

1.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for TMC Made A
for TMMF Made B



A

2.GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM

B

3.GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM
2.GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM
HINT:

If DTC P057113 is output by the dynamic radar cruise control system, perform troubleshooting for the electronically controlled brake system first.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model TMC Made)>HOW TO PROCEED WITH TROUBLESHOOTING


Result:
Proceed to
NEXT



NEXT

END

3.GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM
HINT:

If DTC P057113 is output by the dynamic radar cruise control system, perform troubleshooting for the electronically controlled brake system first.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model TMMF Made)>HOW TO PROCEED WITH TROUBLESHOOTING


Result:
Proceed to
NEXT



NEXT

END