When a communication malfunction is detected between the forward recognition camera and an ECU or sensor, a DTC is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U010087 | Lost Communication with ECM/PCM "A" Missing Message | for HV Model:
When the ignition switch is ON for 3 seconds or more, a communication malfunction between the forward recognition camera and the ECM continues for approximately 1 second or more. for Gasoline Model:
When the ignition switch is ON for 3 seconds or more, a communication malfunction between the forward recognition camera and the ECM continues for approximately 2 seconds or more. |
CAN communication system |
| U010187 | Lost Communication with TCM Missing Message | for HV Model:
When the ignition switch is ON for 3 seconds or more, a communication malfunction between the forward recognition camera and the hybrid vehicle control ECU continues for approximately 8 seconds or more. for Gasoline Model:
When the ignition switch is ON for 3 seconds or more, a communication malfunction between the forward recognition camera and the TCM continues for approximately 8 seconds or more. |
CAN communication system |
| U012687 | Lost Communication with Steering Angle Sensor Module Missing Message | When the ignition switch is ON for 3 seconds or more, a communication malfunction between the forward recognition camera and the steering sensor continues for approximately 1 second or more. | CAN communication system |
| U012987 | Lost Communication with Brake System Control Module Missing Message | for HV Model:
When the ignition switch is ON for 3 seconds or more, a communication malfunction between the forward recognition camera and the skid control ECU (brake booster with master cylinder assembly)*1 or skid control ECU (brake actuator assembly)*2 continues for approximately 1 second or more. for Gasoline Model:
When the ignition switch is ON for 3 seconds or more, a communication malfunction between the forward recognition camera and the skid control ECU (brake actuator assembly) continues for approximately 1 second or more. |
CAN communication system |
| U013187 | Lost Communication with Power Steering Control Module Missing Message | When the ignition switch is ON for 3 seconds or more, a communication malfunction between the forward recognition camera and the power steering ECU assembly continues for approximately 1 second or more. | CAN communication system |
| U015587 | Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message | When the ignition switch is ON for 3 seconds or more, a communication malfunction between the forward recognition camera and the combination meter assembly continues for 8 seconds or more. | CAN communication system |
| U029387 | Lost Communication with Hybrid/EV Powertrain Control Module Missing Message | When the ignition switch is ON for 3 seconds or more, a communication malfunction between the forward recognition camera and the hybrid vehicle control ECU continues for approximately 2 seconds or more. | CAN communication system |
*1: for TMC Made
*2: for TMMF Made
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Make sure that the DTC detection conditions are met.
If the detection conditions are not met, the system cannot detect the malfunction.
Using the GTS, check for DTCs.
| Result | Proceed to |
|---|---|
| DTC U010087, U010187, U012687, U012987, U013187, U015587 or U029387 is output | A |
| DTCs are not output | B |
| None of the above conditions are met | C |
A
for HV Model:
for Gasoline Model:
B
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
C