Home › General › SPECIFICATIONS › CLUTCH › 2020.07–2020.09
RM36W0E _V1 General _087262 SPECIFICATIONS _0426673 CLUTCH F

SPECIFICATIONS  CLUTCH  SERVICE DATA  


Clutch Pedal (for C551)
Clutch pedal height from floor panel - 154.6 to 174.6 mm (6.09 to 6.87 in.)
Clutch pedal free play Reference 3 to 15 mm (0.118 to 0.591 in.)
Clutch pedal stroke end position to release point Standard distance 200 N (20 kgf, 45.0 lbf): Reference
Clutch pedal stroke at 200 N (20 kgf, 45.0 lbf) Reference 136 mm (5.35 in.)

Clutch Pedal (for EC6A)
Clutch pedal height from floor panel - 158.1 to 178.1 mm (6.22 to 7.01 in.)
Clutch pedal free play Reference 3 to 15 mm (0.118 to 0.591 in.)
Clutch pedal stroke end position to release point Standard distance 25 mm (0.984 in.) or more
Clutch pedal stroke at 200 N (20 kgf, 45.0 lbf) Reference 141 to 151 mm (5.55 to 5.94 in.)

Clutch Unit (for C551)
Clutch disc assembly rivet head depth Minimum rivet head depth 0.3 mm (0.0118 in.)
Clutch disc assembly runout Maximum runout 0.8 mm (0.0315 in.)
Clutch cover assembly diaphragm spring wear Maximum depth 0.5 mm (0.0197 in.)
Maximum width 6.0 mm (0.236 in.)
Flywheel sub-assembly runout Maximum runout 0.1 mm (0.00394 in.)
Clutch cover assembly diaphragm spring tip alignment Maximum non-alignment 0.5 mm (0.0197 in.)

Clutch Unit (for EC6A)
Clutch disc assembly rivet head depth Minimum rivet head depth 0.3 mm (0.0118 in.)
Clutch disc assembly runout Maximum runout 0.8 mm (0.0315 in.)
Clutch cover assembly diaphragm spring wear Maximum depth 0.5 mm (0.0197 in.)
Maximum width 6.0 mm (0.236 in.)
Flywheel sub-assembly runout Maximum runout 0.1 mm (0.00394 in.)
Clutch cover assembly diaphragm spring tip alignment Maximum non-alignment 0.5 mm (0.0197 in.)

Clutch Pedal Switch
Clutch start switch assembly
Tester connection Condition Specified condition
A64-1 - A64-2 On (Pushed in) Below 1 Ω
A64-1 - A64-2 Off (Released) 10 kΩ or higher
Clutch switch assembly
Tester connection Condition Specified condition
A65-1 - A65-2 On (Pushed in) Below 1 Ω
A65-1 - A65-2 Off (Released) 10 kΩ or higher

Brake Fluid
- SAE J1703 or FMVSS No. 116 DOT3
- SAE J1704 or FMVSS No. 116 DOT4