Home › Engine / Hybrid System › 1KR-FE (ENGINE CONTROL) › VACUUM SENSOR › from 2020.07
RM36W0E _51 Engine / Hybrid System _091054 1KR-FE ENGINE CONTROL _0440647 VACUUM SENSOR A

1KR-FE ENGINE CONTROL  VACUUM SENSOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL VACUUM SENSOR GROMMET

a.

Install the new vacuum sensor grommet to the brake booster assembly.


Hide 89420H 2.INSTALL VACUUM SENSOR ASSEMBLY

a.
A468074C01
0.052,0.229 0.771,0.958 0.719,0.729 12 false *A 0.083,2.438 0.604,2.958 0.521,0.521 12 false *B 1.5,1.854 1.719,2.115 0.219,0.26 10 false *a 1.823,4.094 2.083,4.323 0.26,0.229 10 false *a
*A for LHD
*B for RHD
*a 32° +/- 5°


Install the vacuum sensor assembly to the brake booster assembly so that the vacuum sensor assembly is angled as shown in the illustration.


b.

Connect the vacuum sensor assembly connector to the vacuum sensor assembly.


Hide 47201 3.INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY (for LHD)

Hide 47201 4.INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY (for RHD)