Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model TMC Made) › from 2020.07
RM36W0E _54 Brake _088016 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0440901 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model TMC Made) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model TMC Made)  C052696  Steering Angle Sensor Module Component Internal Failure  


DESCRIPTION

The skid control ECU (brake actuator assembly) outputs this DTC when it receives an internal malfunction signal from the steering sensor.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
C052696 Steering Angle Sensor Module Component Internal Failure With the +BS terminal voltage 9.5 to 17.4 V, the skid control ECU receives an error signal from the steering sensor. Steering sensor Brake

PROCEDURE

1.REPLACE STEERING SENSOR

Result:
Proceed to
NEXT



NEXT

END