Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM (for Gasoline Model) › 2020.07–2020.09
RM36W0E _51 Engine / Hybrid System _088664 CRUISE CONTROL _0424996 DYNAMIC RADAR CRUISE CONTROL SYSTEM(for Gasoline Model) D

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM(for Gasoline Model)  FREEZE FRAME DATA  


CHECK FREEZE FRAME DATA


HINT:

The ECU records vehicle and driving condition information as freeze frame data the moment a DTC is stored.


a.

Enter the following menus: Powertrain / Radar Cruise 1*1 or Radar Cruise 2*2 / Trouble Codes.

*1: Output from the ECM

*2: Output from the millimeter wave radar sensor assembly



b.

Select the DTCs (with snow icon) for which freeze frame data is recorded.

Powertrain > Radar Cruise1 > Trouble Codes
50001 374
Powertrain > Radar Cruise2 > Trouble Codes
50001 426
NOTICE:

The operating conditions the moment a DTC is stored are recorded as freeze frame data. Furthermore, only the latest 3 DTCs can be stored by the millimeter wave radar sensor assembly.




LIST OF FREEZE FRAME DATA


a.

Radar Cruise1:

Powertrain > Radar Cruise1
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Cruise Vehicle Speed Vehicle speed Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) Actual vehicle speed -
Cruise Memory Vehicle Speed Stored vehicle speed Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) Stored vehicle speed -
Cruise Request Throttle Opening Angle Cruise requested position 0 to 124.99 deg Changes depending on the conditions of the dynamic radar cruise control system -
Cruise Target Acceleration Target acceleration while in cruise control mode -13.10 to 13.10 m/s2 Current value displayed -
Driving Support ECU Target Acceleration - - - Cannot be used
Cruise Request Driving Force Cruise request torque signal -10.00 to 9.92 kN Changes depending on the conditions of the dynamic radar cruise control system -
Cruise Request Driving Force Feedback Status - - - Cannot be used
Cruise Control Permission Condition - - - Cannot be used
Cruise Control Condition - - - Cannot be used
Cruise Main Switch Operation Condition Cruise control main switch status ON or OFF ON: Cruise control main switch pushed
OFF: Cruise control main switch not pushed
-
Accelerator Pedal Condition of the accelerator pedal during cruising ON or OFF ON: Accelerator pedal depressed
OFF: Accelerator pedal released
-
Cruise Brake Cancel Switch Cruise control brake cancel condition ON or OFF ON: Brake pedal depressed
OFF: Brake pedal released
-
Stop Light Switch Main-CPU Stop light switch signal ON or OFF ON: Brake pedal depressed
OFF: Brake pedal released
-
Stop Light Switch Sub-CPU - - - Cannot be used
Request Manual Cancel - - - Cannot be used
Request Automatic Cancel - - - Cannot be used
Cruise Brake Control Decision Cruise brake control decision ON or OFF ON: Cruise brake activated
OFF: Cruise brake deactivated
-
Cruise Brake Control Permission Condition - - - Cannot be used

b.

Radar Cruise 2:

Powertrain > Radar Cruise2
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Total Distance Traveled - - - Cannot be used
Total Distance Traveled - Unit - - - Cannot be used
Cruise Control Mode Cruise control mode signal Vehicle-to-vehicle Distance Control (All Speed), Vehicle-to-vehicle Distance Control (Hi Speed) or Constant Speed Control Vehicle-to-vehicle Distance Control (All Speed): Vehicle-to-vehicle distance control mode (w/ full-speed range following function)
Vehicle-to-vehicle Distance Control (Hi Speed): Vehicle-to-vehicle distance control mode (w/o full-speed range following function)
Constant Speed Control: Constant speed mode
-
Estimated Vehicle Acceleration Estimated Vehicle Acceleration Min.: -5.00 m/s2, Max.: 5.00 m/s2 Current value displayed -
Accelerator Pedal Idle Accelerator pedal idle position signal ON or OFF ON: Accelerator pedal released
OFF: Accelerator pedal depressed
-
Cruise Warning Request Forward vehicle approach warning signal ON or OFF ON: Forward vehicle approaching
OFF: Forward vehicle not approaching
-
Accelerator Over Ride Accelerator pedal position signal during cruising ON or OFF ON: Accelerator over ride ON
OFF: Accelerator over ride OFF
-
Front Radar Sensor High Temperature Millimeter wave radar sensor assembly high temperature abnormality Normal or High Temperature Normal: Millimeter wave radar sensor assembly temperature is normal
High Temperature: Millimeter wave radar sensor assembly temperature is high
·

"High Temperature" displayed when the millimeter wave radar sensor assembly is in the following condition

-

When the ambient temperature of the millimeter wave radar sensor assembly is 70°C (158°F) or more, such as when the vehicle is left alone in an extremely hot environment


·

When "High Temperature" is displayed, and the dynamic radar cruise control system is in one of the following conditions

-

X2027 in the vehicle control history (Front Radar Sensor Outside Guaranteed Operating Temperature) is stored

-

"Radar Cruise Control Unavailable" is displayed on the multi-information display


·

If "High Temperature" is displayed, refer to X2027 in the front radar sensor system vehicle control history


Front Radar Sensor Low Voltage Millimeter wave radar sensor assembly low voltage abnormality Normal or Low Voltage Normal: Millimeter wave radar sensor assembly voltage is normal
Low Voltage: Millimeter wave radar sensor assembly voltage is low
·

"Low Voltage" displayed when the millimeter wave radar sensor assembly is in the following condition

-

When the input voltage is approximately 8 V or less, immediately after turning the engine is started


·

When "Low Voltage" is displayed, and the dynamic radar cruise control system is in one of the following conditions

-

X2028 in the vehicle control history (Front Radar Sensor Outside Guaranteed Operating Voltage) is stored

-

"Radar Cruise Control Unavailable" is displayed on the multi-information display


·

If "Low Voltage" is displayed, refer to X2028 in the front radar sensor system vehicle control history