Home › Drivetrain › CLUTCH › CLUTCH UNIT (for EA67F) › from 2020.09
RM36W0E _52 Drivetrain _089426 CLUTCH _0447224 CLUTCH UNIT(for EA67F) G

CLUTCH  CLUTCH UNIT(for EA67F)  INSPECTION  


PROCEDURE

Hide 31250 1.INSPECT CLUTCH DISC ASSEMBLY

a.
C444207C01
0.615,0.74 0.781,0.521 false 0.448,0.896 0.708,1.115 true 0.854,0.438 1.167,0.635 0.313,0.198 10 false *a 0.75,1.042 1.063,1.24 0.313,0.198 10 false *b
*a Facing
*b Rivet


Using a vernier caliper, measure the rivet head depth.

Minimum Rivet Head Depth:

0.3 mm (0.0118 in.)


If necessary, replace the cover and disc clutch set.


b.
C444208

Install the clutch disc assembly to the manual transaxle assembly.

HINT:

Insert the clutch disc assembly in the correct direction.



c.

Using a dial indicator, measure the clutch disc assembly runout.

Maximum Runout:

0.8 mm (0.0315 in.)


If necessary, replace the cover and disc clutch set.


Hide 31210 2.INSPECT CLUTCH COVER ASSEMBLY

a.
C444209C01
1.115,0.354 1.427,0.552 0.313,0.198 10 false *a 0.385,0.594 0.698,0.792 0.313,0.198 10 false *b
*a Width
*b Depth


Using a vernier caliper, measure the depth and width of the diaphragm spring wear.

Maximum:
Depth:

0.5 mm (0.0197 in.)

Width:

6.0 mm (0.236 in.)


If necessary, replace the cover and disc clutch set.


Hide 13405 3.INSPECT FLYWHEEL SUB-ASSEMBLY

C444210

a.

Using a dial indicator, check the flywheel sub-assembly runout.

Maximum Runout:

0.1 mm (0.00394 in.)


If necessary, replace the flywheel sub-assembly.