58910C
1.INSTALL REAR CONSOLE BOX ASSEMBLY
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Engage the claws and guides to install the rear console box assembly as shown in the illustration.
Install the 2 bolts.
Install the 2 screws.
58822A
2.INSTALL REAR UPPER CONSOLE PANEL
Engage the clamp.
Connect the connector.
|
Install in this Direction |
Engage the clips to install the rear upper console panel as shown in the illustration.
58903A
3.INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
|
Install in this Direction |
Engage the clips and guide to install the console rear end panel sub-assembly as shown in the illustration.
58810J
4.INSTALL CONSOLE BOX ASSEMBLY
Engage the clamp.
Connect the 2 connectors.
| *a | Guide (A) |
| *b | Correct |
| *c | Incorrect |
|
Install in this Direction |
While inserting guide (A) as shown in the illustration, engage the clips and guides to temporarily install the console box assembly as shown in the illustration.
To avoid damaging the console box assembly, make sure that the guide (A) is securely and correctly engaged.
|
Install in this Direction |
Engage the clips as shown in the illustration.
33504F
5.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
|
Install in this Direction |
Turn the shift lever knob sub-assembly as shown in the illustration and install it.
55407B
6.INSTALL SWITCH HOLE BASE SUB-ASSEMBLY
Connect each connector.
|
Install in this Direction |
Engage the guides and clip to install the switch hole base sub-assembly as shown in the illustration.
|
Install in this Direction |
Engage the guide and clips to install the console box assembly as shown in the illustration.
55432B
7.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL
w/ Entry and Start System:
Connect the connector.
First align clip A, then align guide B.
Do not engage the clips.
Make sure the clips do not move out of position.
While holding the parts in place so that clip A do not move out of position, engage the guides and press the clips and claws in the order shown in the illustration to install the lower instrument panel finish panel.
|
Install in this Direction | - | - |
Check that the lower instrument panel finish panel is securely installed and that none of the clips and claws are raised up or not properly engaged.
55479D
8.INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL GARNISH
Engage the guide and claw to install the lower instrument cluster finish panel garnish.