Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER (for 3 Door) › from 2020.09
RM36W0E _59 Vehicle Exterior _088302 EXTERIOR PANELS / TRIM _0447294 REAR BUMPER(for 3 Door) A

EXTERIOR PANELS / TRIM  REAR BUMPER(for 3 Door)  REASSEMBLY  


PROCEDURE

Hide 52016A 1.INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH

a.
B596067

Install the rear bumper arm sub-assembly LH with 4 bolts.

Torque:
17 N*m (173 kgf*cm, 13 ft.*lbf)


Hide 52015A 2.INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 52156A 3.INSTALL REAR BUMPER SIDE SUPPORT LH

a.
B596066

Install the rear bumper side support LH with screw.


b.

w/ Blind Spot Monitor System:

i.
B596065

Engage the wire harness clamp.



Hide 52155A 4.INSTALL REAR BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure as for the LH side.


Hide 6.INSTALL REAR COMBINATION LIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 52576 7.INSTALL REAR BUMPER SIDE RETAINER LH

a.
B596064

Engage the guides and claw to install the rear bumper side retainer LH.


b.
B596068

Engage the clips as shown in the illustration.


c.

w/ Blind Spot Monitor System:

i.
B596062

Engage the wire harness clamps.



Hide 52575 8.INSTALL REAR BUMPER SIDE RETAINER RH

HINT:

Use the same procedure as for the LH side.


Hide 52453 9.INSTALL REAR BUMPER CENTER GUARD

a.

Engage the guides and claws to install the rear bumper center guard.

B596061


b.

Install the 2 screws.


c.

Install the 3 clips.

B596060


Hide 52169C 10.INSTALL REAR BUMPER LOWER COVER

a.
B596059

Engage the hook to install the rear bumper lower cover.


b.

Engage the claws.


Hide 52162B 11.INSTALL NO. 1 REAR BUMPER PLATE

a.
B596058

Engage the hook to install the No. 1 rear bumper plate.


b.

Engage the claws.


Hide 81920 12.INSTALL REFLEX REFLECTOR ASSEMBLY LH

a.
B596057

Engage the guide and claw to install the reflex reflector assembly LH.


b.

Install the screw.


Hide 81910 13.INSTALL REFLEX REFLECTOR ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 82182 14.INSTALL NO. 2 LUGGAGE ROOM WIRE

a.

w/ Parking Support Brake System:

B588002

i.

Engage the clamps to install the No. 2 luggage room wire.



b.

w/o Parking Support Brake System:

B588001

i.

Engage the clamps to install the No. 2 luggage room wire.



Hide 15.INSTALL BACK-UP LIGHT ASSEMBLY

Hide 89348R 16.INSTALL REAR CORNER ULTRASONIC SENSOR RETAINER (w/ Parking Support Brake System)

Hide 89348S 17.INSTALL REAR CENTER ULTRASONIC SENSOR RETAINER (w/ Parking Support Brake System)

Hide 89342 18.INSTALL REAR CORNER ULTRASONIC SENSOR (w/ Parking Support Brake System)

Hide 89342A 19.INSTALL REAR CENTER ULTRASONIC SENSOR (w/ Parking Support Brake System)

Hide 89348N 20.INSTALL NO. 1 ULTRASONIC SENSOR CLIP (w/ Parking Support Brake System)