76887
1.INSTALL REAR SPOILER SEAL
When installing the rear spoiler seal, heat the rear spoiler assembly using a heat light.
| Item | Temperature |
|---|---|
| Rear Spoiler Assembly | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the rear spoiler assembly excessively.
Clean the rear spoiler assembly surface.
Using a heat light, heat the rear spoiler assembly surface.
Remove the double-sided tape from the rear spoiler assembly.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the rear spoiler assembly.
Remove the release paper from a new rear spoiler seal.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the rear spoiler seal.
76875
2.INSTALL NO. 4 REAR SPOILER PROTECTOR
Using the same procedure, install every No. 4 rear spoiler protector.
When installing the No. 4 rear spoiler protector, heat the rear spoiler assembly using a heat light.
| Item | Temperature |
|---|---|
| Rear Spoiler Assembly | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the rear spoiler assembly excessively.
Clean the rear spoiler assembly surface.
Using a heat light, heat the rear spoiler assembly surface.
Remove the double-sided tape from the rear spoiler assembly.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the rear spoiler assembly.
Remove the release paper from a new No. 4 rear spoiler protector.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 4 rear spoiler protector.
76873
3.INSTALL NO. 2 REAR SPOILER PROTECTOR
Using the same procedure, install every No. 2 rear spoiler protector.
When installing the No. 2 rear spoiler protector, heat the rear spoiler assembly using a heat light.
| Item | Temperature |
|---|---|
| Rear Spoiler Assembly | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the rear spoiler assembly excessively.
Clean the rear spoiler assembly surface.
Using a heat light, heat the rear spoiler assembly surface.
Remove the double-sided tape from the rear spoiler assembly.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the rear spoiler assembly.
Remove the release paper from a new No. 2 rear spoiler protector.
After removing the release paper, keep the exposed adhesive free from foreign matter.
| *a | Line |
Install the No. 2 rear spoiler protector as shown in the illustration.
Install the No. 2 rear spoiler protector along the line on the rear spoiler assembly.
76872
4.INSTALL NO. 1 REAR SPOILER PROTECTOR
When installing the No. 1 rear spoiler protector, heat the rear spoiler assembly using a heat light.
| Item | Temperature |
|---|---|
| Rear Spoiler Assembly | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the rear spoiler assembly excessively.
Clean the rear spoiler assembly surface.
Using a heat light, heat the rear spoiler assembly surface.
Remove the double-sided tape from the rear spoiler assembly.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the rear spoiler assembly.
Remove the release paper from a new No. 1 rear spoiler protector.
After removing the release paper, keep the exposed adhesive free from foreign matter.
| *a | Line |
Install the No. 1 rear spoiler protector as shown in the illustration.
Install the No. 1 rear spoiler protector along the line on the rear spoiler assembly.
81570
5.INSTALL CENTER STOP LIGHT ASSEMBLY