Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING (for 3 Door) › from 2020.09
RM36W0E _59 Vehicle Exterior _088302 EXTERIOR PANELS / TRIM _0447301 ROCKER PANEL MOULDING(for 3 Door) A

EXTERIOR PANELS / TRIM  ROCKER PANEL MOULDING(for 3 Door)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 65632D 1.REMOVE REAR WHEEL HOUSE FRONT PLATE

Hide 75852 2.REMOVE ROCKER PANEL MOULDING

a.

Apply protective tape around the rocker panel moulding and doors as shown in the illustration.

B596027C01
0,0 0,0 false
V100155

Protective Tape - -



b.

Remove the 6 clips.

B596028


c.

Remove the 2 clips and 6 screws.

B596029C01
5.177,0.521 5.385,0.719 0.208,0.198 10 true *a 0.99,0.854 1.177,1.042 0.188,0.188 10 true *b 5.229,1.385 5.438,1.583 0.208,0.198 10 true *a 3.042,1.292 3.25,1.49 0.208,0.198 10 true *a 1.906,1.24 2.115,1.438 0.208,0.198 10 true *a 1.656,1.323 1.833,1.531 0.177,0.208 10 true *a 0.979,0.635 1.156,0.844 0.177,0.208 10 true *a 1.073,1.281 1.26,1.469 0.188,0.188 10 true *b
*a screw *b clip



d.

Remove the 3 grommets.

B596030


e.

Disengage the clips to remove the rocker panel moulding as shown in the illustration.

B591171C02
0,0 0,0 false
V113147

Remove in this Direction - -