Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › FRONT SPEED SENSOR › from 2020.09
RM36W0E _54 Brake _088016 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0422091 FRONT SPEED SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  FRONT SPEED SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.

·

The front speed sensor rotor is a component of the front axle hub sub-assembly. If the front speed sensor rotor is malfunctioning, replace the front axle hub sub-assembly.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 53876A 2.SEPARATE FRONT FENDER LINER

a.

for G16E-GTS:

i.
C445394C01
1.135,1.948 1.375,2.146 0.24,0.198 10 true *a 2.375,1.938 2.615,2.135 0.24,0.198 10 true *a 2.417,0.677 2.656,0.875 0.24,0.198 10 true *c 0.646,0.417 0.885,0.615 0.24,0.198 10 true *b 2,0.052 2.24,0.25 0.24,0.198 10 true *b 2.292,0.375 2.531,0.573 0.24,0.198 10 true *b 1.073,0.854 1.313,1.052 0.24,0.198 10 true *b 1.313,1.406 1.552,1.604 0.24,0.198 10 true *b 2.448,1.406 2.688,1.604 0.24,0.198 10 true *b 2.469,1.01 2.708,1.208 0.24,0.198 10 true *a
*a Screw
*b Clip
*c Grommet


Remove the 6 clips, 3 screws and grommet to separate the front fender liner.



b.

except G16E-GTS:

i.
C432514C01
1.927,1.979 2.156,2.135 0.229,0.156 10 true *a 1.01,0.531 1.208,0.688 0.198,0.156 10 true *b 2.177,1.052 2.385,1.219 0.208,0.167 10 true *c 1.063,1.823 1.292,1.979 0.229,0.156 10 true *a 1.375,1.469 1.604,1.625 0.229,0.156 10 true *a 2.156,1.49 2.385,1.646 0.229,0.156 10 true *a 1.208,1.021 1.406,1.177 0.198,0.156 10 true *b 2.135,0.802 2.333,0.958 0.198,0.156 10 true *b 1.958,0.313 2.156,0.469 0.198,0.156 10 false *b 2.177,1.292 2.385,1.458 0.208,0.167 10 true *c
*a Screw
*b Clip
*c Grommet


Remove the 4 clips, 4 screws and 2 grommets to separate the front fender liner.



Hide 89543 3.REMOVE FRONT SPEED SENSOR

a.

Turn back the front fender liner.


b.
C432515

Disconnect the connector.


c.

Disengage the clamp from the vehicle body.


d.
C432516

Disengage the 4 clamps from the vehicle body.


e.
C432517

Remove the bolt and hook to separate the front speed sensor.


f.
C432518

Remove the bolt and separate the front flexible hose and front speed sensor clamp from the front shock absorber assembly.


g.
C432519

Disengage the clamp from the front shock absorber assembly.


h.

Remove the bolt and front speed sensor from the steering knuckle.

NOTICE:
·

Keep the tip of the front speed sensor and installation hole free of foreign matter.

·

Do not rotate or apply excessive force to the front speed sensor when removing it from the steering knuckle. Rotating or applying excessive force may result in damage to the front speed sensor.