Home › General › SPECIFICATIONS › BRAKE SYSTEM (OTHER) › from 2020.09
RM36W0E _V1 General _087262 SPECIFICATIONS _0422036 BRAKE SYSTEM (OTHER) F

SPECIFICATIONS  BRAKE SYSTEM (OTHER)  SERVICE DATA  


Brake Fluid:

*: If a fluid type with "TOYOTA GENUINE BRAKE FLUID DOT4, CLASS6", FMVSS No.116 DOT4 or SAE J1704LV is not available, fluid type with TOYOTA GENUINE BRAKE FLUID DOT3, FMVSS No.116 DOT3 or SAE J1703 may be used with no detriment to brake durability.

SAE J1703 or FMVSS No. 116 DOT3
SAE J1704 or FMVSS No. 116 DOT4
"TOYOTA GENUINE BRAKE FLUID DOT4, CLASS6"*, FMVSS No.116 DOT4 or SAE J1704LV*


Brake Pedal (for HV Model LHD):
Brake pedal height from floor panel 157.8 to 173.8 mm (6.21 to 6.84 in.)
Brake pedal free play 1.0 to 6.0 mm (0.0394 to 0.236 in.)
Brake Pedal Reserve Distance from Floor Panel at 300 N (31 kgf, 67.4 lbf) 82 mm (3.23 in.) or more


Brake Pedal (for HV Model RHD):

*1: for TMC Made

*2: for TMMF Made

Brake pedal height from floor panel 157.8 to 173.8 mm (6.21 to 6.84 in.)
Brake pedal free play 1.0 to 6.0 mm (0.0394 to 0.236 in.)
Brake Pedal Reserve Distance from Floor Panel at 300 N (31 kgf, 67.4 lbf) 101 mm (3.98 in.) or more*1
82 mm (3.23 in.) or more*2


Brake Pedal (for Gasoline Model LHD):

*1: for M15A-FKS

*2: for 1KR-FE

*3: for G16E-GTS

Brake pedal height from floor panel 157.8 to 173.8 mm (6.21 to 6.84 in.)
Brake pedal free play 1.0 to 6.0 mm (0.0394 to 0.236 in.)
Brake Pedal Reserve Distance from Floor Panel at 300 N (31 kgf, 67.4 lbf) 82 mm (3.23 in.) or more*1
84 mm (3.31 in.) or more*2
100 mm (3.94 in.) or more*3


Brake Pedal (for Gasoline Model RHD):

*1: for TMC Made M15A-FKS, 1KR-FE

*2: for TMC Made G16E-GTS

*3: for TMMF Made M15A-FKS

*4: for TMMF Made 1KR-FE

Brake pedal height from floor panel 157.8 to 173.8 mm (6.21 to 6.84 in.)
Brake pedal free play 1.0 to 6.0 mm (0.0394 to 0.236 in.)
Brake Pedal Reserve Distance from Floor Panel at 300 N (31 kgf, 67.4 lbf) 83 mm (3.27 in.) or more*1
98 mm (3.86 in.) or more*2
82 mm (3.23 in.) or more*3
84 mm (3.31 in.) or more*4


Brake Booster Pump:
Tester Connection Condition Specified Condition
A30-2(BM1) - A30-4(GND1) Always Below 10 Ω
A30-1(BM2) - A30-3(GND2) Always Below 10 Ω
A30-2(BM1) - A30-1(BM2) Always Below 1 Ω
A30-4(GND1) - A30-3(GND2) Always Below 1 Ω


Vacuum Pump:
Negative pressure of vacuum pump assembly More than 86.7 kPa (650 mmHg, 25.6 in.Hg)


Vacuum Warning Switch (for Gasoline Model LHD):
Standard Resistance 10 kΩ or higher
Below 1 Ω
(Brake pedal depressed several times and vacuum fully released)


Vacuum Warning Switch (for Gasoline Model RHD):
Standard Resistance 10 kΩ or higher
Below 1 Ω
(Brake pedal depressed several times and vacuum fully released)