Home › Vehicle Exterior › LIGHTING (EXT) › HIGH MOUNTED STOP LIGHT ASSEMBLY (for 5 Door) › from 2020.09
RM36W0E _59 Vehicle Exterior _087824 LIGHTING (EXT) _0447371 HIGH MOUNTED STOP LIGHT ASSEMBLY(for 5 Door) A

LIGHTING (EXT)  HIGH MOUNTED STOP LIGHT ASSEMBLY(for 5 Door)  INSTALLATION  


PROCEDURE

Hide 81570 1.INSTALL CENTER STOP LIGHT ASSEMBLY

a.

Engage the claws to install the center stop light assembly.


Hide 81006 2.INSTALL CENTER STOP LIGHT SET

a.

for Type A:

i.

Connect the connector.



b.

for Type B:

i.

Connect the connector.



c.

Engage the claws to install the center stop light set.


d.

Install the 2 screws.

NOTICE:

Do not put screws into the service holes where a screwdriver is inserted.


HINT:

If there is looseness even after tightening the screws, replace the center stop light set with a new one.



Hide 3.INSTALL CENTER STOP LIGHT COVER LH

a.

Engage the claws to install the center stop light cover LH.


Hide 4.INSTALL CENTER STOP LIGHT COVER RH

HINT:

Use the same procedure as for the LH side.