Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT (for 5 Door) › from 2020.09
RM36W0E _59 Vehicle Exterior _088480 DOOR / HATCH _0447502 BACK DOOR SUPPORT(for 5 Door) A

DOOR / HATCH  BACK DOOR SUPPORT(for 5 Door)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 68960B 1.REMOVE BACK DOOR STAY ASSEMBLY

CAUTION:
·
B572299

Do not perform work if the back door is not securely supported.

·

The back door could fall, resulting in injury.



NOTICE:
·

Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

·

Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

·

Do not apply any horizontal load to the door stay in order to prevent the piston rod from deforming.



a.
B565064C01
0.563,0.823 0.417,0.656 true 0.188,0.552 0.385,0.729 0.198,0.177 10 true *a
*a Protective Tape


Using a screwdriver with its tip wrapped in protective tape, remove the 2 stop rings as shown in the illustration.


b.

Release the ball joint to remove the back door stay assembly.

NOTICE:
·

Remove the back door stay assembly while supporting the back door by hand.

·

Remove the back door stay assembly while supporting the back door stay assembly by hand.




Hide 68946 2.REMOVE BACK DOOR DAMPER STAY UPPER BRACKET

a.
B565065

Remove the 2 bolts and back door damper stay upper bracket.


Hide 68948 3.REMOVE BACK DOOR DAMPER STAY LOWER BRACKET

a.
B565066

Remove the 2 bolts and back door damper stay bracket lower.