DATA LIST
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
According to the display on the GTS, read the Data List.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Total Distance Traveled | - | - | - | Not applicable |
| Total Distance Traveled - Unit | - | - | - | Not applicable |
| FR Door Lock Position Switch Status | Front door RH unlock detection switch | Lock or Unlock | Lock: Front door RH locked
Unlock: Front door RH unlocked |
- |
| FL Door Lock Position Switch Status | Front door LH unlock detection switch | Lock or Unlock | Lock: Front door LH locked
Unlock: Front door LH unlocked |
- |
| RR Door Lock Position Switch Status | Rear door RH unlock detection switch*1 | Lock or Unlock | Lock: Rear door RH locked
Unlock: Rear door RH unlocked |
- |
| RL Door Lock Position Switch Status | Rear door LH unlock detection switch*1 | Lock or Unlock | Lock: Rear door LH locked
Unlock: Rear door LH unlocked |
- |
| Back Door Lock Position Status | Back door unlock detection switch | Lock or Unlock | Lock: Back door locked
Unlock: Back door unlocked |
- |
| FR Door Courtesy Switch Status | Front door courtesy light switch RH | Close or Open | Close: Front door RH closed
Open: Front door RH open |
- |
| FL Door Courtesy Switch Status | Front door courtesy light switch LH | Close or Open | Close: Front door LH closed
Open: Front door LH open |
- |
| RR Door Courtesy Switch Status | Rear door courtesy light switch RH*1 | Close or Open | Close: Rear door RH closed
Open: Rear door RH open |
- |
| RL Door Courtesy Switch Status | Rear door courtesy light switch LH*1 | Close or Open | Close: Rear door LH closed
Open: Rear door LH open |
- |
| Back Door Courtesy Switch Status | Back door courtesy light switch | Close or Open | Close: Back door closed
Open: Back door open |
- |
| Hood Courtesy Switch Status | Engine hood courtesy switch | Close or Open | Close: Engine hood closed
Open: Engine hood open |
- |
| Intrusion Sensor Cancel Switch | Intrusion sensor cancel switch*2 | OFF or ON | OFF: Intrusion sensor cancel switch off
ON: Intrusion sensor cancel switch on |
- |
| Glass Breakage Sensor | Glass breakage sensor connecting*2 | Without or With | Without: Glass breakage sensor not connected
With: Glass breakage sensor connected |
- |
| IGR Power | IGR Signal | OFF or ON | OFF: Ignition switch off
ON: Ignition switch ON |
- |
| Key Unlock Warning Switch | Unlock warning switch signal*3 | OFF or ON | OFF: No key in ignition key cylinder
ON: Key in ignition key cylinder |
- |
| Communication Intrusion Sensor 1 | Theft warning ultrasonic sensor1 connecting*2 | STOP or OK | OK: Theft warning ultrasonic sensor connected
STOP: Theft warning ultrasonic sensor not connected |
- |
| Communication Intrusion Sensor 2 | Theft warning ultrasonic sensor2 connecting*2 | STOP or OK | OK: Theft warning ultrasonic sensor connected
STOP: Theft warning ultrasonic sensor not connected |
- |
| Warning by Horn Function | Setting of customize setting " Warning by Horn" | Disable or Enable | Customize setting displayed | w/ Wireless Door Lock Buzzer Answer-back Function |
| Security Control with Mechanism Key Function | Setting of customize setting "Security control with mechanism key function" | Disable or Enable | Customize setting displayed | w/o Wireless Door Lock Buzzer Answer-back Function |
*1: for 5 Door
*2: w/ Intrusion Sensor
*3: w/o Entry and Start System
ACTIVE TEST
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.
According to the display on the GTS, perform the Active Test.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Security Indicator | Security indicator*2 | OFF or ON | - |
| Vehicle Horn | Vehicle horn | OFF or ON | - |
| Security Horn | Security horn assembly | OFF or ON | - |
| Self Power Siren | Theft warning siren assembly*3 | OFF or ON | - |
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Immobiliser Indicator | Security indicator*1 | OFF or ON | - |
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Security Indicator | Security indicator light*2 | ON or OFF | - |
*1: w/ Entry and Start System
*2: w/o Entry and Start System
*3: w/ Intrusion Sensor