Home › Engine / Hybrid System › G16E-GTS (ENGINE MECHANICAL) › CYLINDER HEAD › from 2020.09
RM36W0E _51 Engine / Hybrid System _095252 G16E-GTS ENGINE MECHANICAL _0447815 CYLINDER HEAD A

G16E-GTS ENGINE MECHANICAL  CYLINDER HEAD  REPLACEMENT  


PROCEDURE

Hide 11122 1.REPLACE INTAKE VALVE GUIDE BUSH

a.

Heat the cylinder head sub-assembly to between 80 and 100°C (176 to 212°F).


b.

Place the cylinder head sub-assembly on wooden blocks.

CAUTION:

Be sure to wear protective gloves.



c.
A479848N01
1.896,0.844 2.323,1.625 2.323,1.625 1.708,1.115 true 2.344,1.646 2.688,1.875 0.344,0.229 10 false SST

Using SST and a hammer, tap out the intake valve guide bush.

SST
09201-01055  
09950-70010  (09951-07100)


d.
A479850

Using a caliper gauge, measure the intake valve guide bush bore diameter of the cylinder head sub-assembly.

Standard Intake Valve Guide Bush Bore Diameter:

10.285 to 10.306 mm (0.405 to 0.406 in.)


New Guide Bush Selection Chart:
Bush Size Specified Condition
STD 10.333 to 10.344 mm (0.40681 to 0.40724 in.)
O/S 0.05 10.383 to 10.394 mm (0.40877 to 0.40921 in.)


Standard Bush Length:

41.3 to 41.7 mm (1.63 to 1.64 in.)


HINT:
·

If the intake valve guide bush bore diameter of the cylinder head sub-assembly is more than 10.306 mm (0.406 in.), machine the intake valve guide bush bore of the cylinder head sub-assembly to a dimension of 10.335 to 10.356 mm (0.407 to 0.408 in.) to install an O/S 0.05 intake valve guide bush.

·

If the intake valve guide bush bore diameter of the cylinder head sub-assembly is more than 10.356 mm (0.408 in.), replace the cylinder head sub-assembly.




e.

Heat the cylinder head sub-assembly to between 80 and 100°C (176 to 212°F).


f.
A479851C01
1.26,0.865 0.677,1.323 0.677,1.323 1.198,1.115 true 2.344,1.375 2.552,1.552 0.208,0.177 10 true *a 0.396,1.354 0.792,1.583 0.396,0.229 10 true SST
*a Protrusion Height


Using SST and a hammer, tap in the selected intake valve guide bush.

SST
09201-10000  (09201-01050)
09950-70010  (09951-07100)

Standard Protrusion Height:

13.35 to 13.60 mm (0.526 to 0.535 in.)



g.
A479852

Using a sharp 5.5 mm reamer, ream the intake valve guide bush to obtain the standard oil clearance.

Standard Oil Clearance:

0.025 to 0.060 mm (0.000984 to 0.00236 in.)



Hide 11126 2.REPLACE EXHAUST VALVE GUIDE BUSH

a.

Heat the cylinder head sub-assembly to between 80 and 100°C (176 to 212°F).


b.

Place the cylinder head sub-assembly on wooden blocks.

CAUTION:

Be sure to wear protective gloves.



c.
A479849N01
1.042,0.948 1.656,1.031 1.656,1.031 1.135,1.24 true 1.708,0.958 2.167,1.156 0.458,0.198 10 true SST

Using SST and a hammer, tap out the exhaust valve guide bush.

SST
09201-01055  
09950-70010  (09951-07100)


d.
A479853

Using a caliper gauge, measure the exhaust valve guide bush bore diameter of the cylinder head sub-assembly.

Standard Exhaust Valve Guide Bush Bore Diameter:

10.285 to 10.306 mm (0.405 to 0.406 in.)


New Guide Bush Selection Chart:
Bush Size Specified Condition
STD 10.333 to 10.344 mm (0.40681 to 0.40724 in.)
O/S 0.05 10.383 to 10.394 mm (0.40877 to 0.40921 in.)


Standard Bush Length:

43.3 to 43.7 mm (1.70 to 1.72 in.)


HINT:
·

If the exhaust valve guide bush bore diameter of the cylinder head sub-assembly is more than 10.306 mm (0.406 in.), machine the exhaust valve guide bush bore of the cylinder head sub-assembly to a dimension of 10.335 to 10.356 mm (0.407 to 0.408 in.) to install an O/S 0.05 exhaust valve guide bush.

·

If the exhaust valve guide bush bore diameter of the cylinder head sub-assembly is more than 10.356 mm (0.408 in.), replace the cylinder head sub-assembly.




e.

Heat the cylinder head sub-assembly to between 80 and 100°C (176 to 212°F).


f.
A479854C01
1.01,0.927 1.594,0.854 1.594,0.854 1.125,1.188 true 3.083,1.333 3.281,1.51 0.198,0.177 10 true *a 1.667,0.729 2.115,0.948 0.448,0.219 10 true SST
*a Protrusion Height


Using SST and a hammer, tap in the selected exhaust valve guide bush.

SST
09201-10000  (09201-01050)
09950-70010  (09951-07100)

Standard Protrusion Height:

13.75 to 14.00 mm (0.541 to 0.551 in.)



g.
A479855

Using a sharp 5.5 mm reamer, ream the exhaust valve guide bush to obtain the standard oil clearance.

Standard Oil Clearance:

0.030 to 0.065 mm (0.00118 to 0.00256 in.)



Hide 11115A 3.REPLACE RING PIN

NOTICE:

It is not necessary to remove the ring pins unless they are being replaced.


a.

Remove the 8 ring pins.


b.
A479857C02
2.167,2.531 2.479,2.688 0.313,0.156 10 false *a 0.792,1.625 0.948,1.823 0.156,0.198 10 false B 0.073,1.521 0.229,1.719 0.156,0.198 10 false A 2.479,1.885 2.635,2.083 0.156,0.198 10 true B 3.167,1.021 3.323,1.219 0.156,0.198 10 false A 3.271,0.427 3.427,0.625 0.156,0.198 10 false A 2.146,0.104 2.302,0.302 0.156,0.198 10 false A 2.74,0.615 2.896,0.813 0.156,0.198 10 true A 1.531,0.865 1.688,1.063 0.156,0.198 10 true A
*a Protrusion Height


Using a plastic hammer, tap in 8 new ring pins to the cylinder head sub-assembly.

Standard Protrusion Height:
RING PIN (A):

3.0 to 5.0 mm (0.118 to 0.197 in.)

RING PIN (B):

4.0 to 6.0 mm (0.157 to 0.236 in.)