Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
48790
1.INSTALL REAR UPPER CONTROL ARM ASSEMBLY
Temporarily install the rear upper control arm assembly to the rear suspension member sub-assembly with the bolt and nut.
Tighten the bolt with the nut secured.
Insert the bolt with the threaded end facing the front of the vehicle.
Position the rear upper control arm assembly as shown in the illustration.
5.6 mm (0.220 in.)
Fully tighten the bolt.
Tighten the bolt with the nut secured.
51206A
2.INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY