Home › Drivetrain › AXLE AND DIFFERENTIAL › DIFFERENTIAL OIL › from 2020.09
RM36W0E _52 Drivetrain _087260 AXLE AND DIFFERENTIAL _0447533 DIFFERENTIAL OIL G

AXLE AND DIFFERENTIAL  DIFFERENTIAL OIL  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT DIFFERENTIAL OIL

a.

Stop the vehicle on a level surface.


b.
C440354

Using a 10 mm socket hexagon wrench, remove the rear differential filler plug and gasket.


c.
A155152C04
1.167,1.01 1.479,1.219 0.313,0.208 10 false *a
*a 0 to 5 mm (0 to 0.196 in.)


Check that the oil level is between 0 to 5 mm (0 to 0.196 in.) from the bottom lip of the differential filler plug hole.

NOTICE:
·

After changing the oil seal, drive the vehicle and then check the oil level again.

·

Too much or too little oil will lead to differential problems.




d.

If there is not enough oil, inspect for oil leaks and fill the differential carrier assembly with Toyota genuine differential gear oil LX SAE 75W-85 API GL-5 or equivalent.


e.
C440354

Using a 10 mm socket hexagon wrench, install a new gasket and the rear differential filler plug.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)