Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › FRONT DRIVE SHAFT ASSEMBLY (for G16E-GTS) › from 2020.09
RM36W0E _52 Drivetrain _087547 DRIVE SHAFT / PROPELLER SHAFT _0447996 FRONT DRIVE SHAFT ASSEMBLY(for G16E-GTS) G

DRIVE SHAFT / PROPELLER SHAFT  FRONT DRIVE SHAFT ASSEMBLY(for G16E-GTS)  INSPECTION  


PROCEDURE

Hide 1.INSPECT FRONT DRIVE SHAFT ASSEMBLY

a.
C211744

Check that there is no excessive play in the radial direction of the outboard joint.


b.

Check that the inboard joint slides smoothly in the thrust direction.


c.

Check that there is no excessive play in the radial direction of the inboard joint.


d.

Check the boots for damage.


e.
C445310C01
1.417,1.25 1.677,1.5 0.26,0.25 10 false (A) 1.417,2.958 1.667,3.208 0.25,0.25 10 false (A) 0.083,0.083 0.333,0.333 0.25,0.25 10 false *a 0.083,1.813 0.333,2.063 0.25,0.25 10 false *b
*a for LH Side
*b for RH Side


Check whether each drive shaft dimension (A) is within specification.

Dimension (A):
for LH Side 584.2 to 594.2 cm (1.92 to 1.95 ft.)
for RH Side 864.4 to 874.4 cm (2.84 to 2.87 ft.)


NOTICE:

Keep the drive shaft assembly level during inspection.