Home › Drivetrain › EA67F (MANUAL TRANSMISSION / TRANSAXLE) › MANUAL TRANSAXLE SYSTEM › from 2020.09
RM36W0E _52 Drivetrain _095283 EA67F MANUAL TRANSMISSION / TRANSAXLE _0448030 MANUAL TRANSAXLE SYSTEM U

EA67F MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSAXLE SYSTEM  TERMINALS OF ECM  


ECM


A475009E01
1.75,0.156 2.167,0.5 0.417,0.344 5.417,0.167 5.833,0.5 0.417,0.333 3.917,0.167 4.333,0.51 0.417,0.344 1.813,0.25 2.323,0.469 0.51,0.219 10 false D104 5.458,0.271 5.969,0.49 0.51,0.219 10 false A106 3.969,0.26 4.583,0.458 0.615,0.198 10 false D105

HINT:

The standard voltage and resistance of each ECM terminal is shown in the table below.

The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard voltage or resistance for that pair of terminals shown in the "Specified Condition" column

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Terminal Description Condition Specified Condition
A106-1 (BATT) - A106-10 (E1) Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
A106-4 (MTMS) - A106-10 (E1) iMT switch signal Ignition switch ON and iMT switch pushed Below 1.5 V
Ignition switch ON and iMT switch not pushed 11 to 14 V
A106-8 (CANH) - A106-10 (E1) CAN communication line Ignition switch ON Pulse generation
A106-9 (+B) - A106-10 (E1) Power source of ECM Ignition switch ON 11 to 14 V
A106-10 (E1) - Body ground Ground Always Below 1 Ω
A106-18 (CANL) - A106-10 (E1) CAN communication line Ignition switch ON Pulse generation
A106-35 (+B2) - A106-10 (E1) Power source of ECM Ignition switch ON 11 to 14 V
A106-42 (SPD) - A106-10 (E1) Vehicle speed signal from combination meter assembly signal Vehicle being driven Pulse generation
A106-43 (VCCL) - A106-44 (E2CL) Power supply for clutch stroke sensor Ignition switch ON 4.5 to 5.5 V
A106-52 (CLS) - A106-44 (E2CL) Clutch pedal stroke sensor signal Ignition switch ON and clutch pedal fully released 0.2 to 1.5 V
Ignition switch ON and clutch pedal fully depressed 2.5 to 4.8 V
D104-104 (THOM) - D104-126 (ETHM) Manual transaxle oil temperature sensor signal manual transaxle oil temperature: 60 to 120°C (140 to 248°F) 0.2 to 1.0 V
D104-116 (VCNE) - A106-10 (E1) Power source of crankshaft position sensor (specific voltage) Engine stopped, ignition switch ON 4.5 to 5.5 V
D105-53 (NIMB) - A106-10 (E1) Power source of transmission revolution sensor Ignition switch ON 11 to 14 V
D105-54 (NIMO) - A106-10 (E1) Transmission revolution sensor signal Engine idling and clutch pedal fully released Pulse generation