After replacing the front disc brake pads, the brake pedal may feel soft due to clearance between the front disc brake pads and front disc. Depress the brake pedal several times until the brake pedal feels firm.
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
1.REMOVE FRONT WHEEL
47749
2.REMOVE FRONT DISC BRAKE PIN HOLD CLIP
Disengage the hook from the front disc brake cylinder assembly and remove the front disc brake pin hold clip from the 2 front disc brake anti-rattle pins.
47748B
3.REMOVE FRONT DISC BRAKE ANTI-RATTLE PIN
While pressing the front disc brake anti-rattle spring, remove the front disc brake anti-rattle pin (upper side).
Disengage the front disc brake anti-rattle spring from the front disc brake pads and remove the front disc brake anti-rattle pin (lower side).
47748
4.REMOVE FRONT DISC BRAKE ANTI-RATTLE SPRING
Remove the front disc brake anti-rattle spring.
04465
5.REMOVE FRONT DISC BRAKE PAD
Be sure to inspect the front disc when replacing the front disc brake pads with new ones.
Click hereBrake>BRAKE (FRONT)>FRONT BRAKE (for 4-Pot Caliper)>INSPECTION
Remove the 2 front disc brake pads from the front disc brake cylinder assembly.
04945
6.REMOVE FRONT DISC BRAKE ANTI-SQUEAL SHIM KIT
| *1 | Front Disc Brake Anti-squeal Shim |
| *2 | Front Disc Brake Pad (Inner) |
| *3 | Front Disc Brake Pad (Outer) |
Remove the 2 front disc brake anti-squeal shims from each front disc brake pad.