Home › General › MAINTENANCE › FRONT DISC BRAKE PAD (for 4-Pot Caliper) › from 2020.09
RM36W0E _V1 General _088300 MAINTENANCE _0448430 FRONT DISC BRAKE PAD(for 4-Pot Caliper) A

MAINTENANCE  FRONT DISC BRAKE PAD(for 4-Pot Caliper)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 04945 1.INSTALL FRONT DISC BRAKE ANTI-SQUEAL SHIM KIT

a.
C447939C01
2.667,1.958 2.667,1.625 false 2,1.771 2,1.438 false 1.25,1.573 1.25,1.24 false 0.583,1.313 0.583,0.979 false 0.5,1.344 0.813,1.5 0.313,0.156 10 false *1 1.177,1.594 1.49,1.75 0.313,0.156 10 false *2 1.927,1.792 2.24,1.948 0.313,0.156 10 false *3 2.583,1.979 2.896,2.135 0.313,0.156 10 false *1
*1 Front Disc Brake Anti-squeal Shim
*2 Front Disc Brake Pad (Inner)
*3 Front Disc Brake Pad (Outer)


Install the 2 front disc brake anti-squeal shims to each front disc brake pad.

NOTICE:

When replacing the front disc brake pads with new ones, make sure to replace the front disc brake anti-squeal shim kit at the same time.



Hide 04465 2.INSTALL FRONT DISC BRAKE PAD

a.
C447937N01
0.896,1.688 1.76,1.646 true 0.917,1.677 1.51,1.458 true 0.896,1.688 1.354,1.177 true 0.594,1.635 0.938,1.802 0.344,0.167 10 false SST

Using SST, push in the front disc brake piston.

SST
09719-77020  
09719-77050  

NOTICE:
·

Make sure the brake fluid does not overflow from the reservoir.

·

Do not forcibly push in the front disc brake piston.




b.
C447938

Install the 2 front disc brake pads to the front disc brake cylinder assembly.

NOTICE:

The rear disc brake pad with the pad wear indicator plate must be installed to the inner upper side position.



Hide 47748 3.TEMPORARILY INSTALL FRONT DISC BRAKE ANTI-RATTLE SPRING

a.
C447935C01
2.969,1.635 2.865,1.25 true 2.917,1.656 3.229,1.813 0.313,0.156 10 false *a
*a Arrow Mark


Temporarily install the front disc brake anti-rattle spring to the front disc brake pads.

NOTICE:
·

Install the front disc brake anti-rattle spring so that its arrow mark is pointing downward.

·

The arrow mark of the front disc brake anti-rattle spring is stamped on the outer side of the vehicle for the LH side, and the inner side of the vehicle for the RH side.




Hide 47748B 4.INSTALL FRONT DISC BRAKE ANTI-RATTLE PIN

a.
C447932

Install the front disc brake anti-rattle pin (lower side) and set the front disc brake anti-rattle spring to the front disc brake pads.

NOTICE:

Set the front disc brake anti-rattle spring so that it does not overlap and ride up onto the front disc brake cylinder assembly.



b.
C447933

While pressing the front disc brake anti-rattle spring, install the front disc brake anti-rattle pin (upper side).


Hide 47749 5.INSTALL FRONT DISC BRAKE PIN HOLD CLIP

a.

Install the front disc brake pin hold clip to the 2 front disc brake anti-rattle pins and engage the hook to the front disc brake cylinder assembly.


Hide 6.INSPECT BRAKE FLUID LEVEL IN RESERVOIR

Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID (for Gasoline Model)>ON-VEHICLE INSPECTION

NOTICE:

After replacing the front disc brake pads, the clearance between the front disc brake pads and the front disc will be large, so depress the brake pedal several times to adjust the clearance before inspecting the brake fluid level.


Hide 7.INSTALL FRONT WHEEL