23070
1.INSTALL FUEL MAIN VALVE ASSEMBLY
Apply gasoline to a new O-ring.
| *1 | O-ring |
| *2 | Spacer |
Install the spacer and O-ring to the fuel main valve assembly.
Install the fuel main valve assembly to the fuel suction with pump and gauge tube assembly.
Make sure that the O-ring is not cut or pinched during installation.
Attach the 3 claws and install the No. 3 fuel suction support to the fuel suction with pump and gauge tube assembly.
Attach the 4 claws and connect the sub-assembly support to the fuel suction with pump and gauge tube assembly.
Apply gasoline to a new O-ring.
Install the O-ring to the fuel suction tube.
Attach the 2 claws and 2 clamps and connect the fuel suction tube to the fuel suction with pump and gauge tube assembly.
83320
2.INSTALL FUEL SENDER GAUGE ASSEMBLY
77020A
3.INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY