Home › Drivetrain › EA67F (MANUAL TRANSMISSION / TRANSAXLE) › MANUAL TRANSAXLE UNIT › from 2020.09
RM36W0E _52 Drivetrain _095283 EA67F MANUAL TRANSMISSION / TRANSAXLE _0449605 MANUAL TRANSAXLE UNIT G

EA67F MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSAXLE UNIT  INSPECTION  


PROCEDURE

Hide 1.INSPECT REVERSE IDLER GEAR THRUST CLEARANCE

a.
C113642

Using a feeler gauge, measure the reverse idler gear thrust clearance.

Standard Clearance:

0.40 to 1.05 mm (0.0157 to 0.0413 in.)


Maximum Clearance:

1.05 mm (0.0413 in.)


If the clearance exceeds the maximum, replace the reverse idler gear, needle roller bearing, and reverse idler gear shaft.


Hide 2.INSPECT REVERSE IDLER GEAR RADIAL CLEARANCE

a.
C113646

Using a dial indicator, measure the reverse idler gear radial clearance.

Standard Clearance:

0.015 to 0.048 mm (0.000591 to 0.00189 in.)


Maximum Clearance:

0.048 mm (0.00189 in.)


If the clearance exceeds the maximum, replace the reverse idler gear, needle roller bearing, and reverse idler gear shaft.