Home › Drivetrain › EA67F (MANUAL TRANSMISSION / TRANSAXLE) › INPUT SHAFT › from 2020.09
RM36W0E _52 Drivetrain _095283 EA67F MANUAL TRANSMISSION / TRANSAXLE _0449606 INPUT SHAFT A

EA67F MANUAL TRANSMISSION / TRANSAXLE  INPUT SHAFT  DISASSEMBLY  


PROCEDURE

Hide 33311P 1.REMOVE INPUT SHAFT REAR BEARING SHAFT SNAP RING

a.
C112390

Using a snap ring expander, remove the input shaft rear bearing shaft snap ring from the input shaft.


Hide 33311E 2.REMOVE INPUT SHAFT REAR RADIAL BALL BEARING

a.
C112391N01
1.479,0.125 1.396,0.125 1.396,0.125 1.323,0.479 false 3.01,0.177 2.885,0.177 2.885,0.177 2.635,0.969 false 1.49,0.031 1.792,0.375 0.302,0.344 10 SST 3.052,0.094 3.354,0.438 0.302,0.344 10 SST

Using SST, remove the input shaft rear radial ball bearing from the input shaft.

SST
09950-40011  (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04011, 09957-04010, 09958-04011)
09631-20031  


Hide 33337 3.REMOVE 6TH DRIVE GEAR

a.
C145266N01
0.471,1.232 0.167,0.267 0.167,0.267 0.553,0.267 false 0.603,0.196 0.89,0.377 0.287,0.182 10 SST

Using SST and a press, remove the 6th drive gear from the input shaft.

SST
09950-00020  


Hide 33333 4.REMOVE 3RD DRIVE GEAR

a.
C117923N01
0.231,0.408 0.54,0.746 0.309,0.338 10 SST 0.592,0.489 0.729,0.489 0.729,0.489 0.822,1.21 false

Using SST and a press, remove the 3rd drive gear from the input shaft.

SST
09950-00020  


b.
C112450

Remove the spacer from the input shaft.


Hide 33334 5.REMOVE 4TH DRIVE GEAR

a.
C112393N01
0.088,0.322 0.384,0.655 0.296,0.333 10 SST 0.456,0.408 0.57,0.408 0.57,0.408 0.758,0.974 false

Using SST and a press, remove the 4th drive gear from the input shaft.

SST
09950-00020  


Hide 33311T 6.REMOVE INPUT SHAFT SNAP RING

a.
C112473

Using 2 screwdrivers and a hammer, remove the input shaft snap ring from the input shaft.


Hide 7.REMOVE INPUT SHAFT FRONT BEARING INNER RACE

a.
C112394N01
0.061,0.254 0.415,0.6 0.354,0.346 10 SST 0.433,0.345 0.576,0.345 0.576,0.345 0.838,1.069 false

Using SST and a press, remove the input shaft front bearing inner race from the input shaft.

SST
09950-00020