The stereo component equalizer assembly uses this circuit to send and receive signals to and from the stereo component amplifier assembly*1 or radio and display receiver assembly*2.
*1: w/ Stereo Component Amplifier Assembly
*2: w/o Stereo Component Amplifier Assembly
Choose the model to be inspected.
| Result | Proceed to |
|---|---|
| w/ Stereo Component Amplifier Assembly | A |
| w/o Stereo Component Amplifier Assembly | B |
A
B
Disconnect the O124 stereo component equalizer assembly connector.
Disconnect the O123 stereo component amplifier assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| O124-12(CH1+) - O123-8(AN1+) | Always | Below 1 Ω |
| O124-26(CH1-) - O123-16(AN1-) | Always | Below 1 Ω |
| O124-11(CH2+) - O123-7(AN2+) | Always | Below 1 Ω |
| O124-25(CH2-) - O123-15(AN2-) | Always | Below 1 Ω |
| O124-10(CH3+) - O123-6(AN3+) | Always | Below 1 Ω |
| O124-24(CH3-) - O123-14(AN3-) | Always | Below 1 Ω |
| O124-22(CH4+) - O123-12(AN4+) | Always | Below 1 Ω |
| O124-8(CH4-) - O123-4(AN4-) | Always | Below 1 Ω |
| O124-17(ACNT) - O123-3(ACNT) | Always | Below 1 Ω |
| O123-13(ASG1) - Body ground | Always | Below 1 Ω |
| O123-5(ASG2) - Body ground | Always | Below 1 Ω |
| O124-12(CH1+) - Body ground | Always | 10 kΩ or higher |
| O124-26(CH1-) - Body ground | Always | 10 kΩ or higher |
| O124-11(CH2+) - Body ground | Always | 10 kΩ or higher |
| O124-25(CH2-) - Body ground | Always | 10 kΩ or higher |
| O124-10(CH3+) - Body ground | Always | 10 kΩ or higher |
| O124-24(CH3-) - Body ground | Always | 10 kΩ or higher |
| O124-22(CH4+) - Body ground | Always | 10 kΩ or higher |
| O124-8(CH4-) - Body ground | Always | 10 kΩ or higher |
| O124-17(ACNT) - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>ACTIVE NOISE CONTROL SYSTEM>PROBLEM SYMPTOMS TABLE
NG
Disconnect the H83 radio and display receiver assembly connector.
Disconnect the O131 stereo component amplifier assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| O131-24(FLI-) - H83-7(FL-) | Always | Below 1 Ω |
| O131-9(FLI+) - H83-2(FL+) | Always | Below 1 Ω |
| O131-23(FRI-) - H83-6(FR-) | Always | Below 1 Ω |
| O131-8(FRI+) - H83-1(FR+) | Always | Below 1 Ω |
| O131-5(RRI+) - H83-4(RR+) | Always | Below 1 Ω |
| O131-20(RRI-) - H83-9(RR-) | Always | Below 1 Ω |
| O131-6(RLI+) - H83-3(RL+) | Always | Below 1 Ω |
| O131-21(RLI-) - H83-8(RL-) | Always | Below 1 Ω |
| O131-7(ASG1) - Body ground | Always | Below 1 Ω |
| O131-22(ASG2) - Body ground | Always | Below 1 Ω |
| O131-24(FLI-) - Body ground | Always | 10 kΩ or higher |
| O131-9(FLI+) - Body ground | Always | 10 kΩ or higher |
| O131-23(FRI-) - Body ground | Always | 10 kΩ or higher |
| O131-8(FRI+) - Body ground | Always | 10 kΩ or higher |
| O131-5(RRI+) - Body ground | Always | 10 kΩ or higher |
| O131-20(RRI-) - Body ground | Always | 10 kΩ or higher |
| O131-6(RLI+) - Body ground | Always | 10 kΩ or higher |
| O131-21(RLI-) - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>ACTIVE NOISE CONTROL SYSTEM>PROBLEM SYMPTOMS TABLE
NG