Home › Engine / Hybrid System › G16E-GTS (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR › from 2020.09
RM36W0E _51 Engine / Hybrid System _095127 G16E-GTS ENGINE CONTROL _0449863 ENGINE COOLANT TEMPERATURE SENSOR G

G16E-GTS ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 89422A 1.INSPECT ENGINE COOLANT TEMPERATURE SENSOR

CAUTION:
A342307

·

Do not put your hands into the water that has been heated for the inspection.

·

Touching the heated water could result in burns.



a.
A402373C06
1.51,0.042 1.906,0.25 0.396,0.208 1.052,0.083 1.292,0.313 0.24,0.229 10 false *a 1.583,0.063 1.885,0.292 0.302,0.229 10 false D35
*a Component without harness connected
(Engine Coolant Temperature Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
D35-1 - D35-2 20°C (68°F) 2.32 to 2.59 kΩ
D35-1 - D35-2 80°C (176°F) 0.310 to 0.326 kΩ


NOTICE:

If checking the engine coolant temperature sensor in water, be careful not to allow water to contact the terminals. After checking, wipe the water off the engine coolant temperature sensor.


If the result is not as specified, replace the engine coolant temperature sensor.