Home › Engine / Hybrid System › G16E-GTS (ENGINE CONTROL) › KNOCK SENSOR › from 2020.09
RM36W0E _51 Engine / Hybrid System _095127 G16E-GTS ENGINE CONTROL _0449864 KNOCK SENSOR G

G16E-GTS ENGINE CONTROL  KNOCK SENSOR  INSPECTION  


PROCEDURE

Hide 89615 1.INSPECT KNOCK SENSOR

a.
A171218C24
1.552,0.302 1.938,0.531 0.385,0.229 0.094,0.094 0.344,0.344 0.25,0.25 10 false *a 1.656,0.333 1.906,0.583 0.25,0.25 10 false e1
*a Component without harness connected
(Knock Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
e1-1 - e1-2 25°C (77°F) 120 to 280 kΩ


If the result is not as specified, replace the knock sensor.