Home › General › SPECIFICATIONS › G16E-GTS ENGINE CONTROL › from 2020.09
RM36W0E _V1 General _087262 SPECIFICATIONS _0449870 G16E-GTS ENGINE CONTROL F

SPECIFICATIONS  G16E-GTS ENGINE CONTROL  SERVICE DATA  


IGNITION SYSTEM
Standard Insulation Resistance Spark plug (terminal part) - Body ground 10 MΩ or higher
Spark Plug Type NGK made DILKAR8U7G
Maximum Electrode Gap for Used Spark Plug 0.9 mm (0.0354 in.)
Standard Electrode Gap for New Spark Plug 0.6 to 0.7 mm (0.0236 to 0.0276 in.)

CAMSHAFT OIL CONTROL VALVE (for Intake Side)
Standard Stroke 2.2 mm (0.0866 in.) or more

CAMSHAFT OIL CONTROL VALVE (for Exhaust Side)
Standard Stroke 2.2 mm (0.0866 in.) or more

CAMSHAFT OIL CONTROL SOLENOID
Standard Resistance 1 - 2 0 °C (32 °F) 6.3 to 7.3 Ω
20 °C (68 °F) 6.9 to 7.9 Ω
40 °C (104 °F) 7.4 to 8.6 Ω
Stroke Amount Standard 4.3 mm (0.169 in.) or more

THROTTLE BODY
Standard Resistance 1(M-) - 2(M+) 20°C (68°F) 0.3 to 100 Ω

ACCELERATOR PEDAL
Standard Voltage Accelerator Position Sensor No.1 Voltage Accelerator pedal fully released 0.5 to 1.1 V
Accelerator pedal fully depressed 2.6 to 4.5 V
Accelerator Position Sensor No.2 Voltage Accelerator pedal fully released 1.2 to 2.0 V
Accelerator pedal fully depressed 3.4 to 4.75 V

ENGINE COOLANT TEMPERATURE SENSOR
Standard Resistance 20°C (68°F) 2.32 to 2.59 kΩ
80°C (176°F) 0.310 to 0.326 kΩ

KNOCK SENSOR
Standard Resistance 25°C (77°F) 120 to 280 kΩ

AIR FUEL RATIO SENSOR (for Sensor 1)
Standard Resistance 1 (HA1A) - 2 (+B) 20°C (68°F) 1.4 to 3.0 Ω
1(HA1A) - 4(A1A-) Always 1 MΩ or higher

AIR FUEL RATIO SENSOR (for Sensor 2)
Standard Resistance 1 (HA1B) - 2 (+B) 20°C (68°F) 1.8 to 2.2 Ω
1 (HA1B) - 4 (A1B-) Always 10 kΩ or higher

RELAY
Standard Resistance
(No. 1 Electronic Fuel Injection Main Relay (EFI-MAIN NO. 1))
3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω
Standard Resistance
(No. 2 Electronic Fuel Injection Main Relay (EFI-MAIN NO. 2))
3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω
Standard Resistance
(No. 3 Electronic Fuel Injection Main Relay (EFI-MAIN NO. 3))
3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω
Standard Resistance
(No. 1 Ignition Relay (IGP))
3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω