When the 4WD ECU assembly is replaced, before removing the 4WD ECU assembly, it is necessary to perform ECU Data Save to save the original 4WD ECU assembly information.
When the 4WD ECU assembly is replaced, it is necessary to perform the following in order: ECU Data Initialization and ECU Data Write.
When the 4WD linear solenoid (transmission coupling assembly) is replaced, it is necessary to perform the following in order: ECU Data Initialization and ECU Data Write (when replacing 4WD linear solenoid (transmission coupling assembly)).
When the yaw rate and acceleration sensor (airbag sensor assembly) is replaced, it is necessary to perform ECU Data Initialization.
| Replaced Part | Necessary Procedure |
|---|---|
| 4WD ECU assembly | 1.
ECU Data Save (ECU being replaced) 2.
ECU Data Write (When replacing 4WD ECU assembly) (New ECU) |
| 4WD linear solenoid (transmission coupling assembly) | 1.
ECU Data Write (When replacing 4WD linear solenoid (transmission coupling assembly)) |
| Yaw rate and acceleration sensor (airbag sensor assembly) | 1.
ECU Data Initialization |
| Tire | 1.
ECU Data Initialization (When performing tire replacement after RoB code X2104 is output) |
ECU DATA SAVE
| *1 | 4WD linear solenoid (transmission coupling assembly) compensation code label |
According to the display on the GTS, perform ECU Data Save.
If the compensation code cannot be read, record the compensation code (4 digits in 8 blocks) on the transmission coupling assembly compensation code label.
| Tester Display |
|---|
| ECU Data Save |
According to the display on the GTS, complete work.
ECU DATA INITIALIZATION
According to the display on the GTS, perform ECU Data Initialization.
| Tester Display |
|---|
| ECU Data Initialization |
According to the display on the GTS, complete work.
ECU DATA WRITE (WHEN REPLACING 4WD ECU ASSEMBLY)
According to the display on the GTS, perform ECU Data Write.
| Tester Display |
|---|
| ECU Data Write |
According to the display on the GTS, complete work.
ECU DATA WRITE (WHEN REPLACING TRANSMISSION COUPLING ASSEMBLY)
| *1 | 4WD linear solenoid (transmission coupling assembly) compensation code label |
Record the printed compensation code (4 digits in 8 blocks) of a new rear transmission coupling assembly.
According to the display on the GTS, perform ECU Data Write.
| Tester Display |
|---|
| ECU Data Write |
Using the on-screen buttons, input the compensation code.
According to the display on the GTS, complete work.