Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM › from 2020.09
RM36W0E _58 Vehicle Interior _087823 LIGHTING (INT) _0419674 LIGHTING SYSTEM W

LIGHTING (INT)  LIGHTING SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE LIGHTING SYSTEM (INT)


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


a.

Customizing using the GTS

i.

Select the setting by referring to the table below.

Illuminated Entry
Tester Display Description Default Setting ECU
Interior Lights ON when Approached Function Lights up the following lights when the map light assembly door linked switch is on the room light assembly switch is set to DOOR, and the electrical key transmitter sub-assembly is brought near the vehicle*1:
·

Map light assembly

·

Room light assembly*3

·

Front door ambient illumination light (front door trim board sub-assembly)*4

·

Under cover light (No. 1 interior illumination light assembly (for RH Side) and No. 1 interior illumination light assembly (for LH Side))*4

·

No. 1 Interior Illumination Light Assembly(Center Tray Illumination Light)*4


Enable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
Interior Lights ON when Door Unlocked Function Lights up the following lights automatically when the map light assembly door linked switch is on the room light assembly switch is set to DOOR, and the doors are unlocked by an unlock operation:
·

Map light assembly

·

Room light assembly*3

·

Front door ambient illumination light (front door trim board sub-assembly)*4

·

Under cover light (No. 1 interior illumination light assembly (for RH Side) and No. 1 interior illumination light assembly (for LH Side))*4

·

No. 1 Interior Illumination Light Assembly(Center Tray Illumination Light)*4


Enable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
Interior Lights ON when IG OFF Function Lights up the following lights automatically when the map light assembly door linked switch is on the room assembly) switch is set to DOOR, and the ignition switch is turned from ON or ACC to off:
·

Map light assembly

·

Room light assembly*3

·

Front door ambient illumination light (front door trim board sub-assembly)*4

·

Under cover light (No. 1 interior illumination light assembly (for RH Side) and No. 1 interior illumination light assembly (for LH Side))*4

·

No. 1 Interior Illumination Light Assembly(Center Tray Illumination Light)*4


Enable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
Light Control Function Dims the following lights when the ignition switch is ON and the shift lever is moved to any position other than P:
·

Map light assembly

·

Room light assembly*3

·

Front door ambient illumination light (front door trim board sub-assembly)*4

·

Under cover light (No. 1 interior illumination light assembly (for RH Side) and No. 1 interior illumination light assembly (for LH Side))*4

·

No. 1 Interior Illumination Light Assembly(Center Tray Illumination Light)*4


Enable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
Interior Illumination Light 1 Function Function of lighting Interior Illumination. Interior Illumination Light is being interlocked with Inside Foot Light.*2 Enable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
Interior Lights Lighting Timer Setting Changes the lighting time of the following lights that are operated by the timer function when the DOOR switch of the map light assembly and room light assembly is on Normal $00:Normal,$01:Short,$02:Long Main body ECU (Multiplex network body ECU)
Interior Lights ON Function Function to set the lighting control of interior lights.
·

Map light assembly

·

Room light assembly*3

·

Front door ambient illumination light (front door trim board sub-assembly)*4

·

Under cover light (No. 1 interior illumination light assembly (for RH Side) and No. 1 interior illumination light assembly (for LH Side))*4

·

No. 1 Interior Illumination Light Assembly(Center Tray Illumination Light)*4


Enable $00:Disable,$01:Enable Main body ECU (Multiplex network body ECU)
50006 6

*1: w/ Entry and Start System

*2: for vehicles displaying the Item "Interior Illumination Light 1 Function" on the GTS

*3: w/ Room Light

*4: w/ Ambient Illumination Light




b.

Customizing with the multi-display

i.

Turn the ignition switch to ON.


ii.

Enter the following menus: MENU / Setup / Vehicle / Vehicle customisation / Lights settings.


iii.

Select the setting by referring to the table below.

Display Default Content Setting Relevant ECU
Interior Lights Auto-off Timer 15 sec. Changes the lighting time of the following lights that are operated by the timer function when the DOOR switch of the map light assembly and room light assembly is on:
·

Map light assembly

·

Room light assembly*1

·

Front door ambient illumination light (front door trim board sub-assembly)*2

·

Under cover light (No. 1 interior illumination light assembly (for RH Side) and No. 1 interior illumination light assembly (for LH Side))*2

·

No. 1 Interior Illumination Light Assembly(Center Tray Illumination Light)*2


Off, 7.5 sec., 15 sec., 30 sec. Main body ECU (Multiplex network body ECU)

*1: w/ Room Light

*2: w/ Ambient Illumination Light