Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for RHD vehicles.
Use the same procedure for the driver side and front passenger side.
The procedure listed below is for the driver side.
72497B
1.INSTALL VERTICAL ADJUSTER BRACKET COVER (w/ Vertical Adjuster)
Engage the claw to install the vertical adjuster bracket cover.
72125U
2.INSTALL REAR UPPER SEAT TRACK COVER
Use the same procedure for both sides.
|
Install in this Direction |
Engage the claws to install the rear upper seat track cover as shown in the illustration.
72265
3.INSTALL SEAT TRACK UPPER RAIL COVER
Use the same procedure for both sides.
|
Install in this Direction |
Engage the claws to install the seat track upper rail cover as shown in the illustration.
72211
4.INSTALL SEAT TRACK ADJUSTING HANDLE
Engage the claws to install the seat track adjusting handle to the front seat adjuster assembly.
71051A
5.INSTALL FRONT SEAT CUSHION SPRING SUB-ASSEMBLY
Engage the hooks to install the front seat cushion spring sub-assembly to the front seat adjuster assembly.
82667D
6.INSTALL CONNECTOR HOLDER
Engage the claw to install the connector holder.
7181A
7.INSTALL FRONT SEAT CUSHION WIRE HARNESS HOLDER
Engage the claw to install the front seat cushion wire harness holder.
Install the 2 screws.
71537C
8.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR (for TMC Made RH Side)
Engage the claw to install the front seat cushion edge protector.
71873U
9.INSTALL FRONT SEAT LOWER CUSHION SHIELD
Use the same procedure for both sides.
| *a | Hook |
| *b | Guide |
Engage the guide and claw.
Engage the hook to install the front seat lower cushion shield.
71875F
10.INSTALL SEAT RECLINING ADJUSTER INSIDE COVER RH
Engage the claws to install the seat reclining adjuster inside cover RH.
| *A | for Driver Side | *B | for Passenger Side |
71876F
11.INSTALL SEAT RECLINING ADJUSTER INSIDE COVER LH
Engage the claws to install the seat reclining adjuster inside cover LH.
| *A | for Driver Side | *B | for Passenger Side |
87510L
12.INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Heater)
71071S
13.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER
When installing a separate type front seat cushion cover, refer to Precaution in order to prevent wrinkles from forming.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for 5 Door)>PRECAUTION
for Standard Seat Type:
Engage the claws to install the separate type front seat cushion cover to the separate type front seat cushion pad.
Be careful not to damage the separate type front seat cushion cover.
for Sports Seat Type:
Engage the claws to install the separate type front seat cushion cover to the separate type front seat cushion pad.
Be careful not to damage the separate type front seat cushion cover.
14.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
Engage the hooks (B) and hooks (A) to install the separate type front seat cushion cover with pad.
for Front Passenger Side:
Engage the claw to install the occupant detection sensor connector.
71759C
15.INSTALL FRONT SEATBACK HOOK
Engage the claws to install the 2 front seatback hooks to the front seatback frame sub-assembly.
71587
16.INSTALL FRONT SEATBACK EDGE PROTECTOR
Install the 2 front seatback edge protectors to the front seatback spring sub-assembly.
71053S
17.INSTALL FRONT SEATBACK SPRING SUB-ASSEMBLY
Engage the guides to install the front seatback spring sub-assembly to the front seatback frame sub-assembly.
Engage the claws to install the 2 front seatback edge protectors to the front seatback frame sub-assembly.
739H0
18.INSTALL FRONT SEAT CENTER AIRBAG ASSEMBLY
73920A
19.INSTALL FRONT SEAT AIRBAG ASSEMBLY
87510N
20.INSTALL FRONT SEATBACK HEATER ASSEMBLY (w/ Heater)
71073S
21.INSTALL SEPARATE TYPE FRONT SEATBACK COVER
When installing a separate type front seatback cover, refer to Precaution in order to prevent wrinkles from forming.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for 5 Door)>PRECAUTION
for Standard Seat Type:
Engage the claws to install the separate type front seatback cover to the separate type front seatback pad.
Be careful not to damage the separate type front seatback cover.
for Sports Seat Type:
Engage the claws to install the separate type front seatback cover to the separate type front seatback pad.
Be careful not to damage the separate type front seatback cover.
22.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
Install the separate type front seatback cover with pad to the front seatback frame sub-assembly.
| *a | Hook (B) |
|
Install in this Direction |
Engage the hook (B).
| *a | Hook (A) |
|
Install in this Direction |
Engage the hook (A).
Install the seatback cover hook.
|
Install in this Direction |
Engage the hook to install the seat cover hanger to the front seatback frame sub-assembly.
71930E
23.INSTALL FRONT SEAT HEADREST SUPPORT ASSEMBLY
|
Install in this Direction |
Engage the claws to install the 2 front seat headrest support assemblies as shown in the illustration.
Close the 2 fasteners as shown in the illustration.
Engage the hooks.
24.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY
Engage the guides to install the separate type front seatback assembly to the separate type front seat cushion assembly.
Install the 4 bolts.
| *1 | Front Seat Airbag Assembly |
| *2 | Front Seat Center Airbag Assembly |
Engage the claw and clamps to install the front seat airbag assembly wire harness.
Engage the clamps to install the front seat center airbag assembly wire harness.
Engage the hooks.
71861
25.INSTALL FRONT SEAT INNER CUSHION SHIELD (for Driver Side)
|
Install in this Direction |
Engage the guide and claws as shown in the illustration.
|
Install in this Direction |
Engage the claws to install the front seat inner cushion shield.
71811D
26.INSTALL FRONT SEAT CUSHION SHIELD (for Driver Side)
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Engage the guide (A) as shown in the illustration.
Engage the guides (B) and claws as shown in the illustration.
|
Install in this Direction |
Engage the claws to install the front seat cushion shield.
71862
27.INSTALL FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)
|
Install in this Direction |
Engage the guide and claws as shown in the illustration.
|
Install in this Direction |
Engage the claws to install the front seat inner cushion shield.
71812D
28.INSTALL FRONT SEAT CUSHION SHIELD (for Front Passenger Side)
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Engage the guide (A) as shown in the illustration.
Engage the guide (B) and claws as shown in the illustration.
|
Install in this Direction |
Engage the claws to install the front seat cushion shield.
71848A
29.INSTALL SEAT ADJUSTER COVER CAP (for Driver Side)
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Engage the guides and claws to install the seat adjuster cover cap as shown in the illustration.
72525A
30.INSTALL RECLINING ADJUSTER RELEASE HANDLE
Engage the guide to install the reclining adjuster release handle.
72551B
31.INSTALL RECLINING HINGE COVER
|
Install in this Direction |
Engage the guide and claw to install the reclining hinge cover as shown in the illustration.
72494A
32.INSTALL FRONT SEAT VERTICAL ADJUSTER HANDLE (for Driver Side)
|
Install in this Direction |
Engage the claw to install the front seat vertical adjuster handle as shown in the illustration.
73240
33.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)
73230
34.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)
71074S
35.CONNECT SEPARATE TYPE FRONT SEATBACK COVER
Connect the rubber band of the separate type front seatback cover.
71910E
36.INSTALL FRONT SEAT HEADREST ASSEMBLY
Install the front seat headrest assembly to the front seat assembly.