Wear protective gloves. Sharp areas on the parts may injure your hands.
71940A
1.REMOVE REAR SEAT HEADREST ASSEMBLY (for RH Side)
Remove the rear seat headrest assembly.
71940A
2.REMOVE REAR SEAT HEADREST ASSEMBLY (for LH Side)
Remove the rear seat headrest assembly.
71960B
3.REMOVE REAR SEAT CENTER HEADREST ASSEMBLY (w/ Center Headrest)
Remove the rear seat center headrest assembly.
73350C
4.DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for RH Side)
| *a | Protective Tape |
Using a screwdriver with its tip wrapped in protective tape, disconnect the rear center seat outer belt assembly as shown in the illustration.
5.REMOVE REAR SEATBACK ASSEMBLY RH (for RH Side)
Fold the rear seatback assembly RH forward.
| *a | Hook and Loop Fastener |
Disengage the hook and loop fasteners.
Remove the 2 bolts.
Disengage the guides to remove the rear seatback assembly RH.
Be careful not to damage the vehicle body.
6.REMOVE REAR SEATBACK ASSEMBLY LH (for LH Side)
Fold the rear seatback assembly LH forward.
| *a | Hook and Loop Fastener |
Disengage the hook and loop fasteners.
Remove the 2 bolts.
Disengage the guides to remove the rear seatback assembly LH.
Be careful not to damage the vehicle body.
7.REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY (for Gasoline Model)
Disconnect the 2 connectors.
Disconnect the connector.
Lift the front edge of the bench type rear seat cushion assembly as shown in the illustration and disengage the rear seat cushion frame hooks on the front side of the bench type rear seat cushion assembly from the rear seat cushion lock hooks.
Be sure to hold the parts of the seat cushion assembly directly next to the rear seat cushion frame hooks when lifting it. Lifting a different part of the cushion may deform the rear seat cushion frame.
| *a | Rear Seat Cushion Frame Hook Front Side | *b | Rear Seat Cushion Frame Hook Rear Side |
|
Place Hands Here |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) | - | - |
| Area | Measurement |
|---|---|
| A | 90 mm (3.5433 in.) |
Disengage the rear seat cushion frame hook on the rear side of the bench type rear seat cushion assembly as shown in the illustration.
8.REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY (for HV Model)
Disconnect the 2 connectors.
Disconnect the connector.
Lift the front edge of the bench type rear seat cushion assembly as shown in the illustration and disengage the rear seat cushion frame hooks on the front side of the bench type rear seat cushion assembly from the rear seat cushion lock hooks.
Be sure to hold the parts of the seat cushion assembly directly next to the rear seat cushion frame hooks when lifting it. Lifting a different part of the cushion may deform the rear seat cushion frame.
| *a | Rear Seat Cushion Frame Hook Front Side | *b | Rear Seat Cushion Frame Hook Rear Side |
|
Place Hands Here |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) | - | - |
| Area | Measurement |
|---|---|
| A | 175 mm (6.895 in.) |
| B | 100 mm (3.94 in.) |
Disengage the rear seat cushion frame hook on the rear side of the bench type rear seat cushion assembly as shown in the illustration.
72693
9.REMOVE REAR SEAT CUSHION LOCK HOOK
Use the same procedure for the RH side and LH side.
|
Remove in this Direction |
Disengage the claws to remove the rear seat cushion lock hook as shown in the illustration.