Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY (for 5 Door) › 2020.09–2021.11
RM36W0E _58 Vehicle Interior _088297 SEAT _0452477 REAR SEAT ASSEMBLY(for 5 Door) A

SEAT  REAR SEAT ASSEMBLY(for 5 Door)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 73178A 1.REMOVE SEAT BELT ANCHOR COVER CAP (for RH Side)

a.
B575648C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Using a moulding remover A, disengage the claws and guides to separate the rear seat shoulder belt cover with seat belt anchor cover cap as shown in the illustration.


b.
B575649C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the guides to remove the seat belt anchor cover cap as shown in the illustration.


Hide 73373 2.REMOVE REAR SEAT SHOULDER BELT COVER (for RH Side)

a.
B575650

Remove the rear seat shoulder belt cover.


Hide 72667 3.REMOVE REAR SEATBACK LOCK UPPER BEZEL (for RH Side)

a.
B614573C01
0.094,0.104 0.469,0.344 0.375,0.24 12 false *A 0.156,2.729 0.531,2.969 0.375,0.24 12 false *B
*A for TMMF Made
*B for TMC Made


Disengage the claws to remove the rear seatback lock upper bezel.


b.
B575652

Disengage the hooks from the separate type rear seatback cover.


Hide 71701B 4.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY RH (for RH Side)

a.
B575665

Disengage the hook.


b.
B575666C01
0.563,0.979 1,1.188 true 2.438,1.177 2.802,0.854 true 1.073,1.104 1.281,1.313 0.208,0.208 10 true *a 2.281,1.188 2.49,1.396 0.208,0.208 10 true *a
*a Fastener


Open the 2 fasteners as shown in the illustration.


c.
B575668C01
1.052,2.635 1.333,3.167 true 1.375,3.104 1.688,3.302 0.313,0.198 10 false *a
*a Protective Tape
V113147

Remove in this Direction


Using a screwdriver with its tip wrapped in protective tape, disengage the claws and guides to remove the rear seatback board sub-assembly RH as shown in the illustration.


Hide 71931A 5.REMOVE REAR SEAT HEADREST SUPPORT (for RH Side)

a.
B575670C01
0,0 0,0 false
V113147

Remove in this Direction


w/ Center Headrest

i.

Disengage the claws to remove the 2 rear seat headrest supports as shown in the illustration.

HINT:

Use the same procedure for rear seat center headrest.




b.
B575670C01
0,0 0,0 false
V113147

Remove in this Direction


w/ Center Headrest

i.

Disengage the claws to remove the 2 rear seat headrest supports as shown in the illustration.



Hide 6.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)

a.
B575672

Pass the rear center seat outer belt assembly through the separate type rear seatback cover with pad and remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly RH.


Hide 71077S 7.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for RH Side)

a.

Using a screwdriver, disengage the claws to remove the separate type rear seatback cover from the separate type rear seatback pad as shown in the illustration.

B575673C01
1.594,2.552 1.854,2.469 true 1.885,2.354 2.198,2.552 0.313,0.198 10 false *a
*a Screwdriver - -



Hide 73350C 8.REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY (for RH Side)

Hide 72630C 9.REMOVE REAR SEATBACK LOCK ASSEMBLY RH (for RH Side)

a.
B575675

Remove the 2 bolts and rear seatback lock assembly RH.


Hide 72667 10.REMOVE REAR SEATBACK LOCK UPPER BEZEL (for LH Side)

a.
B614573C01
0.094,0.104 0.469,0.344 0.375,0.24 12 false *A 0.156,2.729 0.531,2.969 0.375,0.24 12 false *B
*A for TMMF Made
*B for TMC Made


Disengage the claws to remove the rear seatback lock upper bezel.


b.
B575677

Disengage the hooks from the separate type rear seatback cover.


Hide 71702B 11.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH (for LH Side)

a.
B575678

Disengage the hook.


b.
B575679C01
1.052,1.052 1.302,1.271 true 2.146,0.906 2.479,0.75 true 1.365,1.25 1.583,1.458 0.219,0.208 10 true *a 1.906,0.865 2.125,1.073 0.219,0.208 10 true *a
*a Fastener


Open the 2 fasteners as shown in the illustration.


c.
B575681C01
1.042,2.615 1.375,3.156 true 1.406,3.115 1.719,3.313 0.313,0.198 10 false *a
*a Protective Tape
V113147

Remove in this Direction


Using a screwdriver with its tip wrapped in protective tape, disengage the claws and guides to remove the rear seatback board sub-assembly LH as shown in the illustration.


Hide 71931A 12.REMOVE REAR SEAT HEADREST SUPPORT (for LH Side)

a.
B575683C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the 2 rear seat headrest supports as shown in the illustration.


Hide 13.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)

a.
B575685

Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH.


Hide 71078S 14.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for LH Side)

a.

Using a screwdriver, disengage the claws to remove the separate type rear seatback cover from the separate type rear seatback pad as shown in the illustration.

B575686C01
1.573,2.604 1.979,2.427 true 2.031,2.313 2.344,2.51 0.313,0.198 10 false *a
*a Screwdriver - -



Hide 72640A 15.REMOVE REAR SEATBACK LOCK ASSEMBLY LH (for LH Side)

a.
B575688

Remove the 2 bolts and rear seatback lock assembly LH.


Hide 73717D 16.REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR COVER

a.
B574927C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws and guides to remove the child restraint seat cover as shown in the illustration.

HINT:

Use the same procedure for all child restraint seat covers.



b.
B574928C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the child restraint seat base cover as shown in the illustration.

HINT:

Use the same procedure for all child restraint seat base covers.



Hide 73735A 17.REMOVE CHILD RESTRAINT SEAT GUIDE CUP

HINT:

Use the same procedure for all child restraint seat guide cups.


a.
B574929

Remove the child restraint seat guide cup.


Hide 71611 18.REMOVE REAR SEAT CUSHION PAD (for Gasoline Model)

a.

Disengage the hooks to remove the rear seat cushion pad from the bench type rear seat cushion cover.

B593480


Hide 71075B 19.REMOVE BENCH TYPE REAR SEAT CUSHION COVER (for Gasoline Model)

a.

Disengage the hooks.

B593481


b.

Using a screwdriver, disengage the claws to remove the bench type rear seat cushion cover from the rear seat cushion pad sub-assembly as shown in the illustration.

B575690C01
1.51,2.677 1.802,2.552 true 1.844,2.448 2.156,2.646 0.313,0.198 10 false *a
*a Screwdriver - -



Hide 71075B 20.REMOVE BENCH TYPE REAR SEAT CUSHION COVER (for HV Model)

a.

Disengage the hooks.

B593482


b.

Using a screwdriver, disengage the claws to remove the bench type rear seat cushion cover from the rear seat cushion pad sub-assembly as shown in the illustration.

B575693C01
1.521,2.583 1.865,2.417 true 1.896,2.323 2.208,2.521 0.313,0.198 10 false *a
*a Screwdriver - -