Wear protective gloves. Sharp areas on the parts may injure your hands.
71075B
1.INSTALL BENCH TYPE REAR SEAT CUSHION COVER (for Gasoline Model)
When installing a bench type rear seat cushion cover, refer to Precaution in order to prevent wrinkles from forming.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for 5 Door)>PRECAUTION
Engage the claws to install the bench type rear seat cushion cover to the rear seat cushion pad sub-assembly.
Be careful not to damage the bench type rear seat cushion cover.
Engage the hooks.
Be careful not to damage the bench type rear seat cushion cover.
71075B
2.INSTALL BENCH TYPE REAR SEAT CUSHION COVER (for HV Model)
When installing a bench type rear seat cushion cover, refer to Precaution in order to prevent wrinkles from forming.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for 5 Door)>PRECAUTION
Engage the claws to install the bench type rear seat cushion cover to the rear seat cushion pad sub-assembly.
Be careful not to damage the bench type rear seat cushion cover.
Engage the hooks.
Be careful not to damage the bench type rear seat cushion cover.
71611
3.INSTALL REAR SEAT CUSHION PAD (for Gasoline Model)
Engage the hooks to install the rear seat cushion pad to the bench type rear seat cushion cover.
73735A
4.INSTALL CHILD RESTRAINT SEAT GUIDE CUP
Use the same procedure for all child restraint seat guide cups.
Install the child restraint seat guide cup.
73717D
5.INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER
|
Install in this Direction |
Engage the claws to install the child restraint seat base cover as shown in the illustration.
Use the same procedure for all child restraint seat base covers.
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Engage the guides and claws to install the child restraint seat cover as shown in the illustration.
Use the same procedure for all child restraint seat covers.
72640A
6.INSTALL REAR SEATBACK LOCK ASSEMBLY LH (for LH Side)
Install the rear seatback lock assembly LH with the 2 bolts.
71078S
7.INSTALL SEPARATE TYPE REAR SEATBACK COVER (for LH Side)
When installing a separate type rear seatback cover, refer to Precaution in order to prevent wrinkles from forming.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for 5 Door)>PRECAUTION
Engage the claws to install the separate type rear seatback cover to the separate type rear seatback pad.
Be careful not to damage the separate type rear seatback cover.
8.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)
Install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly LH.
71931A
9.INSTALL REAR SEAT HEADREST SUPPORT (for LH Side)
|
Install in this Direction |
Engage the claws to install the 2 rear seat headrest supports as shown in the illustration.
71702B
10.INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY LH (for LH Side)
|
Install in this Direction |
Engage the guides and claws to install the rear seatback board sub-assembly LH as shown in the illustration.
| *a | Fastener |
Close the 2 fasteners as shown in the illustration.
Engage the hook.
72667
11.INSTALL REAR SEATBACK LOCK UPPER BEZEL (for LH Side)
Engage the hooks to the separate type rear seatback cover.
| *A | for TMMF Made |
| *B | for TMC Made |
Engage the claws to install a new rear seatback lock upper bezel.
72630C
12.INSTALL REAR SEATBACK LOCK ASSEMBLY RH (for RH Side)
Install the rear seatback lock assembly RH with the 2 bolts.
73350C
13.INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY (for RH Side)
71077S
14.INSTALL SEPARATE TYPE REAR SEATBACK COVER (for RH Side)
When installing a separate type rear seatback cover, refer to Precaution in order to prevent wrinkles from forming.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for 5 Door)>PRECAUTION
Engage the claws to install the separate type rear seatback cover to the separate type rear seatback pad.
Be careful not to damage the separate type rear seatback cover.
15.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)
Pass the rear center seat outer belt assembly through the separate type rear seatback cover with pad and temporarily install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly RH.
71931A
16.INSTALL REAR SEAT HEADREST SUPPORT (for RH Side)
w/ Center Headrest
|
Install in this Direction |
Engage the claws to install the 2 rear seat headrest supports as shown in the illustration.
Use the same procedure for rear seat center headrest.
w/ Center Headrest
|
Install in this Direction |
Engage the claws to install the 2 rear seat headrest supports as shown in the illustration.
71701B
17.INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY RH (for RH Side)
|
Install in this Direction |
Engage the guides and claws to install the rear seatback board sub-assembly RH as shown in the illustration.
| *a | Fastener |
Close the 2 fasteners as shown in the illustration.
Engage the hook.
72667
18.INSTALL REAR SEATBACK LOCK UPPER BEZEL (for RH Side)
Engage the hooks to the separate type rear seatback cover.
Engage the claws to install a new rear seatback lock upper bezel.
73373
19.INSTALL REAR SEAT SHOULDER BELT COVER (for RH Side)
Install the rear seat shoulder belt cover.
73178A
20.INSTALL SEAT BELT ANCHOR COVER CAP (for RH Side)
|
Install in this Direction |
Engage the guides to install the seat belt anchor cover cap as shown in the illustration.
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Engage the guides and claws to install the rear seat shoulder belt cover with seat belt anchor cover cap as shown in the illustration.