Wear protective gloves. Sharp areas on the parts may injure your hands.
72693
1.INSTALL REAR SEAT CUSHION LOCK HOOK
Use the same procedure for the RH side and LH side.
|
Install in this Direction |
Engage the claws to install a new rear seat cushion lock hook as shown in the illustration.
2.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY (for Gasoline Model)
Place the bench type rear seat cushion assembly in the cabin.
Be careful not to damage the vehicle body.
Engage the rear seat cushion frame hook on the rear side of the bench type rear seat cushion assembly as shown in the illustration.
| *a | Rear Seat Cushion Frame Hook Front Side | *b | Rear Seat Cushion Frame Hook Rear Side |
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Engage the rear seat cushion frame hooks on the front side of the bench type rear seat cushion assembly as shown in the illustration.
Confirm that the bench type rear seat cushion assembly is securely installed.
Connect the connector.
Connect the 2 connectors.
3.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY (for HV Model)
Place the bench type rear seat cushion assembly in the cabin.
Be careful not to damage the vehicle body.
Engage the rear seat cushion frame hook on the rear side of the bench type rear seat cushion assembly as shown in the illustration.
| *a | Rear Seat Cushion Frame Hook Front Side | *b | Rear Seat Cushion Frame Hook Rear Side |
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Engage the rear seat cushion frame hooks on the front side of the bench type rear seat cushion assembly as shown in the illustration.
Confirm that the bench type rear seat cushion assembly is securely installed.
Connect the connector.
Connect the 2 connectors.
4.INSTALL REAR SEATBACK ASSEMBLY LH (for LH Side)
Place the rear seatback assembly LH in the cabin.
Be careful not to damage the vehicle body.
Engage the guides to install the rear seatback assembly LH.
Install the 2 bolts.
Tighten bolts in the order shown in the illustration.
| *a | Hook and Loop Fastener |
Engage the hook and loop fasteners.
5.INSTALL REAR SEATBACK ASSEMBLY RH (for RH Side)
Place the rear seatback assembly RH in the cabin.
Be careful not to damage the vehicle body.
Engage the guides to install the rear seatback assembly RH.
Install the 2 bolts.
Tighten bolts in the order shown in the illustration.
| *a | Hook and Loop Fastener |
Engage the hook and loop fasteners.
73350C
6.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for RH Side)
Connect the rear center seat outer belt assembly as shown in the illustration.
71960B
7.INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (for RH Side)
Install the rear seat center headrest assembly.
71940A
8.INSTALL REAR SEAT HEADREST ASSEMBLY (w/ Center Headrest)
Install the rear seat headrest assembly.
71940A
9.INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)
Install the rear seat headrest assembly.