Wear protective gloves. Sharp areas on the parts may injure your hands.
71940A
1.REMOVE REAR SEAT HEADREST ASSEMBLY
Rmove the rear seat headrest assembly.
72667
2.REMOVE REAR SEATBACK LOCK UPPER BEZEL
Disengage the claws to remove the rear seatback lock upper bezel.
Disengage the hooks from the separate type rear seatback cover RH.
71701B
3.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY RH
| *a | Hook |
| *b | Fastener |
Disengage the hook.
Open the fasteners.
| *a | Protective Tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the claws and guides to remove the rear seatback board sub-assembly RH.
71931A
4.REMOVE REAR SEAT HEADREST SUPPORT
Disengage the claws to remove the 2 rear seat headrest supports.
5.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD RH
Remove the separate type rear seatback cover with pad RH from the rear seatback frame sub-assembly RH.
71077S
6.REMOVE SEPARATE TYPE REAR SEATBACK COVER RH
Using a screwdriver, disengage the claws to remove the separate type rear seatback cover RH from the separate type rear seatback pad RH as shown in the illustration.
| *a | Screwdriver | - | - |
72630C
7.REMOVE REAR SEATBACK LOCK ASSEMBLY RH
Remove the 2 bolts and rear seatback lock assembly RH.
71940A
8.INSTALL REAR SEAT HEADREST ASSEMBLY
Rmove the rear seat headrest assembly.
72667
9.REMOVE REAR SEATBACK LOCK UPPER BEZEL
Disengage the claws to remove the rear seatback lock upper bezel.
Disengage the hooks from the separate type rear seatback cover LH.
71702B
10.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH
| *a | Hook |
| *b | Fastener |
Disengage the hook.
Open the fasteners.
| *a | Protective Tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the claws and guides to remove the rear seatback board sub-assembly LH.
71931A
11.REMOVE REAR SEAT HEADREST SUPPORT
Disengage the claws to remove the 2 rear seat headrest supports.
12.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD LH
Remove the separate type rear seatback cover with pad LH from the rear seatback frame sub-assembly LH.
71078S
13.REMOVE SEPARATE TYPE REAR SEATBACK COVER LH
Using a screwdriver, disengage the claws to remove the separate type rear seatback cover LH from the separate type rear seatback pad LH as shown in the illustration.
| *a | Screwdriver | - | - |
72640A
14.REMOVE REAR SEATBACK LOCK ASSEMBLY LH
Remove the 2 bolts and rear seatback lock assembly LH.
71075B
15.REMOVE BENCH TYPE REAR SEAT CUSHION COVER
Disengage the hook and loop fasteners and hooks.
Using a screwdriver, disengage the claws to remove the bench type rear seat cushion cover from the rear seat cushion pad sub-assembly as shown in the illustration.
| *a | Screwdriver | - | - |
|
Hook and Loop Fastener | - | - |