Wear protective gloves. Sharp areas on the parts may injure your hands.
71075B
1.INSTALL BENCH TYPE REAR SEAT CUSHION COVER
When installing a bench type rear seat cushion cover, refer to Precaution in order to prevent wrinkles from forming.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for 5 Door)>PRECAUTION
Engage the claws to install the bench type rear seat cushion cover to the rear seat cushion pad sub-assembly.
Engage the hooks and hook and loop fasteners.
|
Hook and Loop Fastener | - | - |
Be careful not to damage the bench type rear seat cushion cover.
72640A
2.INSTALL REAR SEATBACK LOCK ASSEMBLY LH
Install the rear seatback lock assembly LH with the 2 bolts.
71078S
3.INSTALL SEPARATE TYPE REAR SEATBACK COVER LH
When installing a separate type rear seatback cover, refer to Precaution in order to prevent wrinkles from forming.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for 5 Door)>PRECAUTION
Engage the claws to install the separate type rear seatback cover LH to the separate type rear seatback pad LH.
Be careful not to damage the separate type rear seatback cover.
4.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD LH
Install the separate type rear seatback cover with pad LH to the rear seatback frame sub-assembly LH.
71931A
5.INSTALL REAR SEAT HEADREST SUPPORT
Engage the claws to install the 2 rear seat headrest supports.
71702B
6.INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY LH
Engage the guides and claws to install the rear seatback board sub-assembly LH.
| *a | Fastener |
| *b | Hook |
Close the fasteners.
Engage the hook.
72667
7.INSTALL REAR SEATBACK LOCK UPPER BEZEL
Engage the hooks to the separate type rear seatback cover LH.
Engage the claws to install a new rear seatback lock upper bezel.
71940A
8.INSTALL REAR SEAT HEADREST ASSEMBLY
Install the rear seat headrest assembly.
72630C
9.INSTALL REAR SEATBACK LOCK ASSEMBLY RH
Install the rear seatback lock assembly RH with the 2 bolts.
71077S
10.INSTALL SEPARATE TYPE REAR SEATBACK COVER RH
When installing a separate type rear seatback cover, refer to Precaution in order to prevent wrinkles from forming.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for 5 Door)>PRECAUTION
Engage the claws to install the separate type rear seatback cover RH to the separate type rear seatback pad RH.
Be careful not to damage the separate type rear seatback cover.
11.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD RH
Install the separate type rear seatback cover with pad RH to the rear seatback frame sub-assembly RH.
71931A
12.INSTALL REAR SEAT HEADREST SUPPORT
Engage the claws to install the 2 rear seat headrest supports.
71701B
13.INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY RH
Engage the guides and claws to install the rear seatback board sub-assembly RH.
| *a | Fastener |
| *b | Hook |
Close the fasteners.
Engage the hook.
72667
14.INSTALL REAR SEATBACK LOCK UPPER BEZEL
Engage the hooks to the separate type rear seatback cover RH.
Engage the claws to install a new rear seatback lock upper bezel.
71940A
15.INSTALL REAR SEAT HEADREST ASSEMBLY
Install the rear seat headrest assembly.