1.DISCONNECT ENGINE WIRE
Remove the bolt.
Disengage the clamp and disconnect the engine wire.
89421K
2.REMOVE NO. 1 TURBO PRESSURE SENSOR
Disconnect the No. 1 turbo pressure sensor connector.
Remove the bolt and No. 1 turbo pressure sensor from the intake manifold.
If the No. 1 turbo pressure sensor has been struck or dropped, replace it.
89421L
3.REMOVE NO. 2 TURBO PRESSURE SENSOR
Disconnect the No. 2 turbo pressure sensor connector.
Remove the 2 bolts and No. 2 turbo pressure sensor from the air tube assembly.
If the No. 2 turbo pressure sensor has been struck or dropped, replace it.