Home › Engine / Hybrid System › G16E-GTS (ENGINE CONTROL) › MANIFOLD ABSOLUTE PRESSURE SENSOR › from 2020.09
RM36W0E _51 Engine / Hybrid System _095127 G16E-GTS ENGINE CONTROL _0452485 MANIFOLD ABSOLUTE PRESSURE SENSOR A

G16E-GTS ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89421L 1.INSTALL NO. 2 TURBO PRESSURE SENSOR

a.

Install the No. 2 turbo pressure sensor to the air tube assembly with the 2 bolts.

NOTICE:

If the No. 2 turbo pressure sensor has been struck or dropped, replace it.


Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the No. 2 turbo pressure sensor connector.


Hide 89421K 2.INSTALL NO. 1 TURBO PRESSURE SENSOR

a.

Install the No. 1 turbo pressure sensor to the intake manifold with the bolt.

NOTICE:

If the No. 1 turbo pressure sensor has been struck or dropped, replace it.


Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Disconnect the No. 1 turbo pressure sensor connector.


Hide 3.CONNECT ENGINE WIRE

a.

Engage the clamp and connect the engine wire.


b.

Install the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)