Home › Engine / Hybrid System › G16E-GTS (ENGINE CONTROL) › MANIFOLD ABSOLUTE PRESSURE SENSOR › from 2020.09
RM36W0E _51 Engine / Hybrid System _095127 G16E-GTS ENGINE CONTROL _0452485 MANIFOLD ABSOLUTE PRESSURE SENSOR G

G16E-GTS ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR  INSPECTION  


PROCEDURE

Hide 89421L 1.INSPECT NO. 2 TURBO PRESSURE SENSOR

a.
A327353C09
1.542,0.125 1.896,0.354 0.354,0.229 1.281,0.844 0.802,0.844 true 2.531,0.5 2.375,0.5 2.375,0.5 1.917,0.823 true 0.104,0.094 0.417,0.25 0.313,0.156 10 false *a 0.417,0.76 0.833,0.927 0.417,0.167 10 false THTA 2.604,0.427 2.938,0.635 0.333,0.208 10 false E2 1.583,0.156 1.927,0.417 0.344,0.26 10 false D94
*a Component without harness connected
(No. 2 Turbo Pressure Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
D94-4 (THIM) -D94-2 (E2) - 20°C (- 36°F) 13.8 to 18.6 kΩ
20°C (68°F) 2.09 to 2.81 kΩ
80°C (176°F) 0.274 to 0.370 kΩ


If the result is not as specified, replace the No. 2 turbo pressure sensor.