Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › INTRUSION SENSOR CANCEL SWITCH › from 2020.09
RM36W0E _58 Vehicle Interior _087476 THEFT DETERRENT / KEYLESS ENTRY _0452640 INTRUSION SENSOR CANCEL SWITCH G

THEFT DETERRENT / KEYLESS ENTRY  INTRUSION SENSOR CANCEL SWITCH  INSPECTION  


PROCEDURE

Hide 84350B 1.INSPECT THEFT WARNING SENSOR SWITCH ASSEMBLY

E402227C12
1.396,0.219 1.927,0.448 0.531,0.229 1.281,1.865 1.448,1.365 true 1,1.865 1.25,1.365 true 2.219,1.865 2.052,1.365 true 2.5,1.865 2.25,1.365 true 0.167,0.177 0.458,0.396 0.292,0.219 10 false *a 0.75,1.865 1.365,2.063 0.615,0.198 10 false ILL+ 2.5,1.865 3.115,2.063 0.615,0.198 10 false ILL- 1.115,1.885 1.625,2.083 0.51,0.198 10 false SOFF 2.094,1.917 2.49,2.104 0.396,0.188 10 false VV- 1.479,0.25 1.885,0.479 0.406,0.229 10 false H147
*a Component without harness connected
(Theft Warning Sensor Switch Assembly)


a.

Resistance Check

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
H147-5 (SOFF) - H147-2 (VV-) Theft warning sensor switch assembly off 10 kΩ or higher
H147-5 (SOFF) - H147-2 (VV-) Theft warning sensor switch assembly on Below 1 Ω


If the result is not as specified, replace the theft warning sensor switch assembly.



b.

Illumination Inspection

i.

Apply auxiliary battery voltage to the theft warning sensor switch assembly and check that the switch illuminates.

OK:
Switch Illumination
Measurement Condition Specified Condition
Auxiliary battery positive (+) - H147-6 (ILL+)
Auxiliary battery negative (-) - H147-1 (ILL-)
Switch illumination illuminates


If the result is not as specified, replace the theft warning sensor switch assembly.