Home › General › SPECIFICATIONS › PARKING BRAKE › from 2020.09
RM36W0E _V1 General _087262 SPECIFICATIONS _0429170 PARKING BRAKE F

SPECIFICATIONS  PARKING BRAKE  SERVICE DATA  


Parking Brake System (w/o Electric Parking Brake)
Parking Brake Lever Travel at 200 N (20 kgf, 45 lbf) 5 to 8 notches

Parking Brake Assembly
Rear disc inside diameter Standard 173.0 mm (6.81 in.)
Maximum 174.0 mm (6.85 in.)
Parking brake shoe lining thickness Standard 3.5 mm (0.138 in.)
Minimum 1.0 mm (0.0394 in.)

Parking Brake Switch
Tester Connection Condition Specified Condition
H37-1 - H37-Body ground On (When shaft is not pressed) Below 1 Ω
H37-1 - H37-Body ground Off (When shaft is pressed) 10 kΩ or higher

Electric Parking Brake Switch Assembly
Tester Connection Condition Specified Condition
7 (SWI1) - 8 (SWO1) OFF (Release) 100 kΩ or higher
ON (Lock) 10 Ω or less
Switch not operated 100 kΩ or higher
7 (SWI1) - 1 (SWI2) OFF (Release) 10 Ω or less
ON (Lock) 10 Ω or less
Switch not operated 100 kΩ or higher
7 (SWI1) - 2 (SWO2) OFF (Release) 10 Ω or less
ON (Lock) 100 kΩ or higher
Switch not operated 10 Ω or less
1 (SWI2) - 8 (SWO1) OFF (Release) 100 kΩ or higher
ON (Lock) 10 Ω or less
Switch not operated 10 Ω or less
1 (SWI2) - 2 (SWO2) OFF (Release) 10 Ω or less
ON (Lock) 100 kΩ or higher
Switch not operated 100 kΩ or higher